|============================================================================== | Begin IBIS Accuracy Trailer |============================================================================== | | Correlation Level = 2 | | Simulator(s) used in correlation: ! Vendor A Product A version xx.xx ! Vendor B Product B version xx.xx | | Disclaimer: The data represented by these figures of merit are the result | of a good-faith attempt to verify correlation between IBIS- | based simulations and actual hardware. Realizing that no | simulation perfectly represents hardware, the vendor and | user agree to work cooperatively to resolve any critical | discrepancies that may arise over the lifetime of a | semiconductor or system product. | | ACME Semiconductor Modeling Hotline: (800) xxx-xxxx | |------------------------------------------------------------------------------ | TEST ENVIRONMENT |------------------------------------------------------------------------------ | | MEASUREMENT CONDITIONS: | | Parameter Min Typ Max Units | --------- --- --- --- ----- | Vdd 2.97 3.30 3.63 V | Ta 27 C |* T-line Zo 50 Ohms |* T-line Tpd 170 ps/in | scope bandwidth 10 GHz | probe bandwidth 1.5 GHz |* probe capacitance 2.0 pF | |* indicates measured value | | | TEST EQUIPMENT: | | Vendor/Model Description Calibrated | ------------ ----------- ---------- | xxxxxx Digital Oscilloscope and TDR 01/01/98 | xxxxxx Digital Oscilloscope Probe 01/01/98 | xxxxxx Semiconductor Parameter Analyzer 01/01/98 | xxxxxx LCR Meter 01/01/98 | |------------------------------------------------------------------------------ | FIGURE OF MERIT (FOM) TABLE |------------------------------------------------------------------------------ | [Model] data_i |------------------------------------------------------------------------------ | | Measured pin 46, signal_name = I1 | | Meas. Description Corner Overlay Envelope Process | ----- ----------- ------ ------- -------- -------- | | 3.1.1 Input typ n/a yes +10% | min 95% n/a n/a | max 95% n/a n/a | | | Meas. Description Corner IBIS min Lab Data IBIS max Units | ----- ----------- ------ -------- -------- -------- ----- | | 3.3.1 Capacitance typ 5.15 5.0 5.15 pF | |------------------------------------------------------------------------------ | [Model] data_o |------------------------------------------------------------------------------ | | Measured pin 2, signal_name = O0 | | Meas. Description Corner Overlay Envelope Process | ----- ----------- ------ ------- -------- -------- | | 3.1.2 Tri-state typ n/a yes +10% | min 95% n/a n/a | max 95% n/a n/a | | 3.1.3 Pull-up typ n/a yes +10% | min 95% n/a n/a | max 95% n/a n/a | | 3.1.4 Pull-down typ n/a yes +10% | min 95% n/a n/a | max 95% n/a n/a | | 3.2.1 50 Ohm-GND typ n/a yes +10% | min 95% n/a n/a | max 95% n/a n/a | | 3.2.2 50 Ohm-VDD typ n/a yes +10% | min 95% n/a n/a | max 95% n/a n/a | | 3.2.3 Open T-line typ n/a yes +10% | min 95% n/a n/a | max 95% n/a n/a | | 3.2.4 T-line & rcv typ n/a yes +10% | min 95% n/a n/a | max 95% n/a n/a | | 3.2.5 Std load typ n/a yes +10% | min 95% n/a n/a | max 95% n/a n/a | | | Meas. Description Corner IBIS min Lab Data IBIS max Units | ----- ----------- ------ -------- -------- -------- ----- | | 3.2.1 dV/dt_r typ 2.12 3.0 3.83 V/ns | 3.2.2 dV/dt_f typ 2.31 3.0 4.09 V/ns | 3.3.1 Capacitance typ 8.15 8.0 8.15 pF | |============================================================================== | End IBIS Accuracy Trailer |==============================================================================