Re[2]: Questions of Polarity and Enable

From: Arpad Muranyi <Arpad_Muranyi@ccm.fm.intel.com>
Date: Mon Dec 09 1996 - 07:37:00 PST

Text item:

Scott,

It seems to me that my respnse didn't make it through the reflector. The
sub-parameters Enable and Polarity are NOT required in an IBIS model according
to the spec. So I don't understand what all the fuss is about this. If you
don't need it, don't use it...

Arpad
==============================================================================

Good morning IBIS world,

The nessessity of having Enable and Polarity specified for the s2ibis
utilities is clear to me. However, I too was wondering why they are
required in the specs. It almost seems like unnesessary data to
require to be listed for all of the types of pins. It SHOULD be required
to specify the enable pin, IF the enable for an I/O is an external pin
itself; such with, it should also have its (the enable pin's) polarity
specified. But, if the enable is only available internally, why specify
it? And, if it is not specifically an external enable pin, why does the
pin's polarity matter to the simulation tools? Thanks,

-Scott Schlachter Actel Corporation
 scotts@actel.com Sunnyvale, CA

Text item: External Message Header

The following mail header is for administrative use
and may be ignored unless there are problems.

***IF THERE ARE PROBLEMS SAVE THESE HEADERS***.

Subject: Re: Questions of Polarity and Enable
To: ibis@vhdl.org, ibis-users@vhdl.org
Message-Id: <9612091520.AA01859@ricky.sun_net>
From: scotts@actel.com (Scott Schlachter)
Date: Mon, 9 Dec 96 07:20:40 PST
Received: by ricky.sun_net (4.1/SMI-4.1)
     id AA01859; Mon, 9 Dec 96 07:20:40 PST
Received: from ricky.sun_net ([190.9.2.228]) by actel.com (4.1/SMI-4.1)
     id AA22981; Mon, 9 Dec 96 07:20:41 PST
Received: from actel.com (rigel-g.actel.com [204.33.232.16]) by vhdl.vhdl.org (8
.7.3/8.7.3) with SMTP id HAA28855; Mon, 9 Dec 1996 07:30:35 -0800 (PST)
Received: from vhdl.vhdl.org (vhdl.vhdl.org [198.31.14.3]) by mailbag.jf.intel.c
om (8.8.4/8.7.3) with ESMTP id HAA20447; Mon, 9 Dec 1996 07:29:22 -0800 (PST)
Received: from mailbag.jf.intel.com (root@mailbag.jf.intel.com [134.134.248.4])
by relay.jf.intel.com (8.8.2/8.7.3) with ESMTP id HAA11128; Mon, 9 Dec 1996 07:2
6:48 -0800 (PST)
Return-Path: owner-ibis@vhdl.vhdl.org
Received on Mon Dec 9 07:59:22 1996

This archive was generated by hypermail 2.1.8 : Fri Jun 03 2011 - 09:53:46 PDT