Sould IBIS reflect SPEC or actual silicon?

From: Chris Reid <chris@icx.com>
Date: Wed Oct 23 1996 - 08:47:00 PDT

I agree with Arpad.

The IBIS model should reflect what the device actually does
because the board designer wants to know what actually happens
when he uses the device, not what the spec says should happen.

If there is a concern about possibly damaging the device then
undershoot and overshoot limits should be specified and tested.

Chris Reid
Received on Wed Oct 23 09:30:33 1996

This archive was generated by hypermail 2.1.8 : Fri Jun 03 2011 - 09:53:46 PDT