Re: IBIS creation for Differential Pins

From: Syed Huq <huq@rockie.nsc.com>
Date: Thu Mar 12 1998 - 12:47:48 PST

Hi,

You can only provide the V/I or Ramp(or V/T) data for one pin at a time
for IBISv2.1. So the answer is, you would sweep one pin at a time.

Regards,
Syed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~ Syed B. Huq huq@rockie.nsc.com ~
~ Interface Apps Engineer ~
~ National Semiconductor Corp. ~
~ Tel:(408)721-4874; Fax:(408)721-4785 ~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

> From owner-ibis@server.vhdl.org Thu Mar 12 11:27:58 1998
> From: Alvin_Cheung@notes.ssi1.com
> X-Lotus-Fromdomain: SSI1
> To: ibis-users@eda.org
> Date: Thu, 12 Mar 1998 10:20:18 -0800
> Subject: IBIS creation for Differential Pins
> Content-Type> : > text/plain> ; > charset=us-ascii>
>
> Hi, I have a question about sweeping Differential pins. Do you sweep one
> pin at a time or both at the same time?
>
>
>
 
Received on Thu Mar 12 12:48:21 1998

This archive was generated by hypermail 2.1.8 : Fri Jun 03 2011 - 09:53:46 PDT