DC convergence

From: by way of John Angulo <lindac@eng.adaptec.com>
Date: Tue Sep 05 2000 - 16:42:20 PDT

Hi,
When DC sweep range from -Vcc to Vcc*2 on the PULLUP/PULLDOWN
simulation, it has convergence problem. I try to use the alternative
method is to do an AC, but the SPICE-IBIS convertor doesn't recognize
the spice output format. So when it generated the IBIS model, it puts
out N/A in the current table. Is there anyone can help me on this?
thanks
linda

 
Received on Tue Sep 5 16:46:27 2000

This archive was generated by hypermail 2.1.8 : Fri Jun 03 2011 - 09:53:47 PDT