Re: Combining IBIS models of the same part from different vendors

From: <Adam.Tambone@fairchildsemi.com>
Date: Thu Jul 05 2001 - 05:32:22 PDT

Kim,

Hmmm... haven't heard of this before although the implementation should be
simple and just a matter of cutting and pasting them together.

Each pin has a model associated with it, so in the pin information section
be sure to correctly map the pin with the model. If the model information
comes from different IBIS datasheets that is ok as long as you correctly
map the nomenclature such as model names. Cut and paste the model
information (model name, model type, DC data, V-t data, parameters, etc. )
and combine into the IBIS datasheet.

[Pin] signal_name model_name R_pin L_pin C_pin
1 a0 data_i_vendor1 101m 3.89n 0.15p
2 b0 data_i_vendor1 81m 3.37n 0.08p
3 a1 data_i_vendor2 81m 2.56n 0.07p
4 b1 data_i_vendor2 81m 2.57n 0.07p

[Model] data_i_vendor1
Model_type Input
Vinh=2.0
Vinl=0.8
C_comp 7.0p NA NA
|
[Temperature Range] 25 85 -40
|
[Voltage Range] 3.30 3.15 3.45
|
[GND Clamp]
   -3.300000E+0 -1.111975E+0 -1.138288E+0 -1.086002E+0
.
.
.
etc

[Model] data_i_vendor2
Model_type Input
Vinh=2.0
Vinl=0.8
C_comp 6.0p NA NA
|
[Temperature Range] 25 85 -40
|
[Voltage Range] 3.30 3.15 3.45
|
[GND Clamp]
   -3.300000E+0 -1.111975E+0 -1.138288E+0 -1.086002E+0
.
.
.
etc

Hope This Helps,
Adam Tambone

Kim Helliwell <kimgh@apple.com> on 07/03/2001 06:14:41 PM

To: "ibis-Users@Eda.Org'" <ibis-users@eda.org>
cc:

Subject: Combining IBIS models of the same part from different vendors

One of the difficulties in the IBIS world is: if you are using a part
that you buy from several
vendors, and they each give you an IBIS model for the part, how do you
combine these
files into some sort of composite models (assuming that is desirable at
all).

Now, it's easy to look at typ, min, max values for caps and voltages,
and figure out
what to do. Harder is combining typ, min, and max pullup and pulldowns,
or VT curves.

What I'm looking for is a "best practice" for this situation: if you've
faced this situation, how have
you dealt with it?

Of course, maybe nobody has faced this yet, because the other
difficulty, of course, is
finding a part, any part, that has multiple suppliers that all provide
IBIS models for them :-)
But we won't go there this time!

Kim Helliwell
Apple Computer
kimgh@apple.com
408 974 9936

 
Received on Thu Jul 5 05:32:34 2001

This archive was generated by hypermail 2.1.8 : Fri Jun 03 2011 - 09:53:47 PDT