RE: How to unsubscribe

From: Syed Huq <shuq@cisco.com>
Date: Fri May 11 2001 - 09:54:15 PDT

If this was done thru majordomo, you could have the subscribe/unsubscribe
information at the end of each email(like they do on the si-list)..

Syed

> From: "Peters, Stephen" <stephen.peters@intel.com>
> To: "'Kim Helliwell'" <khelliwe@acuson.com>, ibis-users@eda.org
> Subject: RE: How to unsubscribe
> Date: Fri, 11 May 2001 09:37:59 -0700
> MIME-Version: 1.0
>
>
> Hi Kim:
>
> Very good suggestion on posting unsubscribe info. In fact, posting an FAQ
> or general information letter to the reflector(s) once a month might not be
> a bad idea. I will look into it...
>
> Regards,
> Stephen Peters
> Intel Corp.
>
>
> -----Original Message-----
> From: Kim Helliwell [mailto:khelliwe@acuson.com]
> Sent: Friday, May 11, 2001 8:36 AM
> To: ibis-users@eda.org
> Subject: How to unsubscribe
>
>
> I lost my instructions for subscribing and unsubscribing from this group,
> and
> I looked in vain for those instructions on the eda website. I assume the
> list is a majordomo list, but is the server eda.org?
>
> I'm not leaving the list permanently, but I'm changing jobs, so I want to
> pull the plug here and be ready to re-attach there.
>
> Thanks!
>
> P.S. sorry to bother the list with this, but it's down to the wire, and
> I've not been able to get this info any other way.
>
> P.P.S. It might be a good idea to publish this info from time to time
> on the list; it might cut down on the number of people who try to
> unsubscribe by sending mail to the list.
>
>
> --
> Kim Helliwell
> Senior CAE Engineer
> Acuson Corporation, a Siemens Company
> Phone: 650 694 5030 FAX: 650 943 7260
>

 
Received on Fri May 11 09:55:02 2001

This archive was generated by hypermail 2.1.8 : Fri Jun 03 2011 - 09:53:47 PDT