Re: Simulation tools

From: Bob Ross <bob@icx.com>
Date: Wed Feb 19 1997 - 12:40:00 PST

To everyone:

The IBIS reflectors are NOT to be used for discussing/
commenting on/comparing COMMERCIAL products of Silicon
Vendors, CAE vendors, Connector Vendors, or Users in
any manner whatsoever.

The IBIS Open Forum consists of many competing companies
working together based on common interests, while at the
same time representing the important positions of individual
companies (most of which are commercial based). If we start
bickering who is best, we will destroy all cooperation.

Real's questions are fair, however. If you which to respond,
please respond in private directly to Real.

Best Regards,
Bob Ross
IBIS Open Forum Chair
Phone (503) 603-2523, Fax (503) 639-3469
bob@icx.com
Interconnectix, 10220 S.W. Nimbus Ave., K4, Portland, OR 97223

> Date: Wed, 19 Feb 1997 11:55:06 -0500
> From: "Real Mongrain Jr." <mongrain@poster.cae.ca>
> To: ibis@vhdl.org
> Subject: Simulation tools

> Hi everyone,

> I want to know if anybody have tried many different signal integrity
> simulation tools? (IBIS compatible)
> Anobody compared SigNoise with XTK? Which one is the best?
> Is there other great tools and what are their big advantage?

> Any comments will be very helpful.

> Regards,
> --
> ===============================================================
> Real Mongrain Jr. MailTo:mongrain@cae.ca
> CAE Electronics Ltd http://www.cae.ca
> 8585 Cote de Liesse
> St-Laurent, Qc, Canada, H4T 1G6
> Tel.:(514) 341-6780 ext.3218 fax.:(514) 734-5618
> ===============================================================

 
Received on Wed Feb 19 12:41:19 1997

This archive was generated by hypermail 2.1.8 : Fri Jun 03 2011 - 09:52:29 PDT