Re: Bird 36.2

Scott:

BIRD41.XX should result in series components which can
be used in Electrical Board Descriptions when referenced
by the [Reference Designator Map].

Best Regards,
Bob Ross
Interconnectix

> Date: Fri, 7 Mar 97 13:48 PST
> From: scottmc@icx.com (Scott McMorrow)
> To: ibis@vhdl.org, owner-ibis@vhdl.vhdl.org
> Subject: Re: Bird 36.2

> Stephen,

> I do not see any accomodation of series pass elements
> in the path structure for this specification. Many memory
> modules, MCM's, and boards utilize series resistors and/or
> more complex filtering structures. It is important to be
> able to model them explicitly, since they are actual components,
> rather than a degenerate case of the transmission line
> descriptor.

> regards,

> Scott McMorrow
> Stramond Corporation

> > To: ibis@vhdl.org
> > Subject: Bird 36.2
> > Date: Fri, 07 Mar 1997 12:20:07 -0800
> > From: Stephen Peters <sjpeters@ichips.intel.com>
> > Status: RO

> > Hello fellow IBISains:

> > Per our discussion at the meeting today, here is Bird36.2. This
> > version includes Bob Ross's comments. Enjoy....

> > Regards,
> > Stephen Peters
> > Intel Corp.

> > ------------------ cut here -----------------------------------------

> > Buffer Issue Resolution Document (BIRD)
> > BIRD ID#: 36.2
> > ISSUE TITLE: Electric Descriptions of Boards
> > REQUESTER: Stephen Peters, Hank Herrmann
> > DATE SUBMITTED: June 23, 1996
> > DATE ACCEPTED BY IBIS OPEN FORUM: Pending

> > ******************************************************************************
> > ******************************************************************************
> > STATEMENT OF THE ISSUE: There is a need to describe SIMM modules and related
> > type components that consist of one or more ICs mounted on a PCB board that
> > connects them to a system thru a set of pins. The following BIRD proposes a
> > new type of file called .ebd (Electrical Board Description) that
> > addresses this need. This proposal does not encompass an electrical
> > description of connectors and other interconnect devices.

> > ******************************************************************************
> > STATEMENT OF THE RESOLVED SPECIFICATIONS: The following text is placed
> > in the specification after the .pkg file description and before the
> > [End] keyword description.

 
Received on Fri Mar 7 17:31:32 1997