Re: Bird 50 (Bus hold) comments from HyperLynx

To All:

Again, thank you for your comments and corrections
and suggestions for example a FULL example with each
BIRD. We will be discussing these at the next meetings.

Bob Ross
Interconnectix/Mentor Graphics

> Date: Thu, 04 Jun 1998 15:33:40 -0700
> To: ibis@vhdl.org
> From: Kellee Crisafulli <kellee@hyperlynx.com>
> Subject: Bird 50 (Bus hold) comments from HyperLynx

> Hi IBIS,

> Results of our engineering meeting on Bird 50:

> 1) Must be changed to use SUB_MODEL concept (Bird 48).
> 2) First paragraph incorrectly mentions the dynamic clamp which is another bird.
> 3) The section describing how it is used is incomplete. There should be
> something that shows how the SUB_MODEL is defined. (i.e. add model).
> 4) There should be a full example model.
> HyperLynx staff
> Kellee
> Steve
> Matt

> Side note:
> I have mentioned this several times before:
> WE MUST HAVE EXAMPLE MODELS. The fact that Bird 52 is needed is a clear
> example of why example models should be required for any bird.
> i.e. Where driver schedule was to be used is not defined.
> I would like to see an archive on the IBIS site for each bird
> that has an associated example if appropriate for that bird.
> If it is important enough to be added to the specification it deserves
> an example.

> (Kellee)

> -------------------------------------------------------------------------
> Have a great day...
> Kellee Crisafulli at HyperLynx
> kellee@hyperlynx.com http://www.hyperlynx.com
> -------------------------------------------------------------------------
Received on Thu Jun 4 16:14:08 1998