Re: IBIS 3.2 model error

From: Lance Wang <lwang@cadence.com>
Date: Tue Jun 12 2001 - 12:10:50 PDT

Hi, Andrew,
I met the same problem before. This is because, in the [Series Pin Mapping] section. You have the model name called series_switch or series. It is not a good idea to use them as a model name. But it is legal! You can live with it in Cadence tools.

Try to rename it and see what happens.

I think this is bug of IBIS GOLDEN PARSER. At least it didn't tell you which problem you met.

-Lance

Liqun Wang (Lance)
Cadence Design Systems, Inc.
PSD High Speed Development
PH:978-446-6685
FAX:978-446-6363

  ----- Original Message -----
  From: Andrew Holmes
  To: ibis@eda.org
  Sent: Tuesday, June 12, 2001 2:02 PM
  Subject: RE: IBIS 3.2 model error

  I am getting the following error on an IBIS 3.2 LVDS input model when I run a check. The error is:

                    checking lvdsiflv33c.ibs for IBIS 3.2 Compatibility...

                    ERROR - Component 'lvdsiflv33c': [Series Pin Mapping] Pin2 '2': model type cannot be Series or Series_switch.

                    Errors : 1

                    File Failed

  Not sure how I should interpret this. The Series model defined looks correct and so does the Series Pin Mapping as defined by the 3.2 spec.

  Any feedback would be appreciated.

  Thanks,

  Andy
  Andy Holmes
  Tality (formerly Cadence Design Systems)
  6950 Hollister Avenue, Suite 200
  Santa Barbara, CA 93117
  PH# 805-571-1206
  FAX 805-571-1300
  aholmes@tality.com

 
Received on Tue Jun 12 12:12:20 2001

This archive was generated by hypermail 2.1.8 : Fri Jun 03 2011 - 09:52:30 PDT