IBIS BIRD73.1 Correction for Fall Back Submodel


Subject: IBIS BIRD73.1 Correction for Fall Back Submodel
From: Bob Ross (bob_ross@mentorg.com)
Date: Wed Oct 03 2001 - 09:49:59 PDT


To All:

One table in BIRD73.1 for BUS HOLD should be corrected as shown
below (low and high changed):

| BUS HOLD WITH OFF_DELAY (REQUIRES EITHER [PULLUP] or [PULLDOWN] ONLY):
|
| Initialization:
|
| [Pullup] or Initial Bus Hold
| [Pulldown] Submodel State (Off mode)
| Driver Table
| ------------ -------------------------
| [Pullup] low
| [Pulldown] high
|

Bob Ross
Mentor Graphics



This archive was generated by hypermail 2b28 : Wed Oct 03 2001 - 10:12:17 PDT