Re: [IBIS] IBIS :s2ibis version 2 untility


Subject: Re: [IBIS] IBIS :s2ibis version 2 untility
From: rahul Sankhe (rahuls@ti.com)
Date: Wed Mar 13 2002 - 15:00:31 PST


After making the chcanges in the source file, the make file compilation
gives the following errors;
=====================================================
make "CFLAGS = -ansi -O2" s2ibis2
make[1]: Entering directory `/user/a0756984/IBIS/s2ibis2/src'
make[1]: *** No rule to make target `/usr/include/ansi_compat.h', needed
by `s2ibis2.o'. Stop.
make[1]: Leaving directory `/user/a0756984/IBIS/s2ibis2/src'
make: *** [solaris] Error 2
=====================================================
Attached with this file is the make file..

Syed,Thanks for the prompt reply for my earlier mail.
Your tips helped,
Thanks
Rahul

Syed Huq wrote:

> Go to the s2istrng.h file in your /src dir
>
> Change the : "spice3 -b %s >%s 2>%s" to whatever it should be
> for TIspice3
>
> Compile and re-run
>
> Syed
>
> > Date: Thu, 14 Mar 2002 01:45:09 +0530
> > From: rahul Sankhe <rahuls@ti.com>
> > X-Accept-Language: en
> > MIME-Version: 1.0
> > To: ibis@eda.org
> > Subject: [IBIS] IBIS :s2ibis version 2 untility
> >
> > IBIS :s2ibis version 2 untility:
> >
> > IBIS utility s2ibis displays an error message ---
> >
> > "
> > * ERROR * [CMDLN:0] Unrecognized option "-b"
> >
> > * MESSAGE * Aborting due to command line errors.
> >
> > * MESSAGE * Please use the -help option to display the spice3 usage.
> > "
> >
> > I am using TIspice3 for generating the model.
> > Please let me know how this problem can be solved?
> >
> > thanks
> > Rahul
> >
> >
> > --
> > Rahul Sankhe Phone : 91-80-5099083
> > IC Design Engineer Mobile:9845196445
> > Data converters group
> > Texas Instruments...
> >
> >

--
Rahul Sankhe                    Phone : 91-80-5099083
IC Design Engineer              Mobile:9845196445
Data converters group
Texas Instruments...


Makefile

----------------------------------------------------------------- |For help or to subscribe/unsubscribe, email majordomo@eda.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Wed Mar 13 2002 - 15:20:08 PST