[IBIS] IBIS minutes (7/19/02)


Subject: [IBIS] IBIS minutes (7/19/02)
From: Guy deBurgh (gdeburgh@innoveda.com)
Date: Wed Jul 24 2002 - 17:34:52 PDT


DATE: 7/24/02

SUBJECT: July 19, 2002 EIA IBIS Open Forum Meeting Minutes

VOTING MEMBERS AND 2002 PARTICIPANTS LIST:
Ansoft Corporation (Eric Bracken)
Apple Computer Kim Helliwell
Applied Simulation Technology Fred Balistreri, Norio Matsui
Cadence Design Lynne Green*, Patrick dos Santos, Lance Wang
Cisco Systems Syed Huq, Abdulrahmun Rafiq, Zhiping Yang
Cypress Semiconductor (Rajesh Manapat)
Huawei Technologies (Jiang Xiang Zhong)
IBM Greg Edlund*, Pravin Patel*
Innoveda (Merged with Mentor John Angulo*, Guy de Burgh*, Steve Gascoigne
  Graphics)
Intel Corporation Stephen Peters*, Arpad Muranyi*, Will Hobbs,
                               Pete Block, Ben Silva, Tony Lewis,
                               Michael Mirmak
LSI Logic [Larry Barnes], Frank Gasparik*
Matsushita (Panasonic) Atsuji Ito
Mentor Graphics Bob Ross*, Ian Dodd, Mike Donnelly,
                               Matt Hogan, Sherif Hammad, Tom Dagostino,
                               Eric Rongere, Karine Loudet
Micron Technology Randy Wolff*
Mitsubishi Pat Hefferan
Molex Incorporated Gus Panella
Motorola Rick Kingen
National Semiconductor Milt Schwartz
NEC Corporation (Akimoto Tetsuya)
North East Systems Associates (Edward Sayre)
Philips Semiconductor (D.C. Sessions)
Quantic EMC (Mike Ventham)
Siemens (& Automotive) AG Helmut Katzier, Katja Koller, Eckhard Lenski*
Signal Integrity Software Barry Katz, Walter Katz, Robert Moles,
                               Daniel Nilsson, Kevin Fisher, Steve Coe,
                               Wiley Gillmor, Douglas Burns, Eric Brock,
Sigrity Raj Raghuram
SiQual [Scott McMorrow], Dave Macemon, Rob Hinz
Texas Instruments Thomas Fisher, Jean-Claude Perrin
Teraspeed (Scott McMorrow)
Time Domain Analysis Systems Steve Corey, Dima Smolyansky
Via Technologies (Weber Chuang)
Zuken (& Incases) Caroline Legendre, Ralf Bruening

OTHER PARTICIPANTS IN 2002:
3Com (& CommWorks) [Roy Leventhal], James Goshorn
Actel Prabhu Mohan
Agilent Herbert Lage
Airbus Claude Huet
Alstom Transport Luca Giacotto
Apt Software Atul Agarwal
Astrium Olivier Prieur
Avanti (Hailong Wang)
Bee Technologies Corporation Tsuyoshi Horigome
Brocade Communications Robert Badal
Compaq Shafier-ur-Rahman
EADS CCR Alix de la Villeguerin
EFM Ekkehard Miersch
EIA [Cecilia Fleming], Chris Denham*
EMC Corporation (Brian Arsenault)
Fairchild Semiconductor Adam Tambone
Force Computers Roger Sukiennik
Harman/Becker Automotive Hartmut Exler
  Systems
Japan Electronics and Kiyomi Daishido
  Information Technology
  Industries Association
  (JEITA)
Leventhal Design and Roy Leventhal*
  Communication
National Institute of Applied Sebastian Calvet (& Motorola), Etienne
Sicard,
  Science (INSA) Stephane Baffreau
Northrup (Litton) Robert Bremer
Sagam SA Quang Ngo, Matthieu Fontaines
Shindengen Elecric Mfg. Co. [Tsuyoshi Horigome]
Sintecs Hans Klos
STMicroelectronics Fabrice Boissieres
TDK Yoshikazu Fujishiro
Thales Saverio Lerose
Tyco Electronics (Tim Minnick)
UTMC Greg Haynes
Xilinx Susan Wu, J.L. de Long
Independent Larry Barnes

In the list above, attendees at the meeting are indicated by *. Principal
members or other active members who have not attended are in parentheses.
Participants who no longer are in the organization are in square brackets.

Upcoming Meetings: The bridge numbers for future IBIS teleconferences
are as follows:

  Date Bridge Number Reservation # Passcode
  August 9, 2002 1-888-316-5901 N/A 8515116
  (International Dial-In: 1-617-801-9781)

All meetings are 8:00 AM to 9:55 AM Pacific Time. We try to have agendas
out 7 days before each Open Forum, and meeting minutes out within 7 days
after. When you call into the meeting, ask for the IBIS Open Forum hosted
by Stephen Peters and give the reservation number and passcode.

NOTE: "AR" = Action Required.

-------------------------------- MINUTES -----------------------------------
INTRODUCTIONS AND MEETING QUORUM
No new participants.

MEMBERSHIP UPDATE AND TREASURER'S REPORT
Stephen Peters reported that Teraspeed Consulting has joined as a Voting
member listed above, making a total of 31 members. Stephen and Bob Ross are
still contacting several other prospective member companies. Our financial
reporting from EIA usually lags actual receipt of payments, so our official
reports typically show fewer members until months later.

REVIEW OF MINUTES AND AR'S
Stephen Peters noted that the June 28, 2002 minutes had the subject line
omitted

  SUBJECT: June 28, 2002 EIA IBIS Open Forum Meeting Minutes

Also the spelling of Atul Agarwal was corrected in the IBISCHK3 section.
These changes were made in the uploaded copy. The minutes were approved
with
these corrections.

The ARs were discussed during the meeting.

MISCELLANY/ANNOUNCEMENTS
None.

PRESS AND WEB PAGE UPDATES
Stephen Peters reported that the Syed Huq updated the IBIS upcoming
events page and the roster page.

Bob Ross reported that the July 8, 2002 article "Mesh Slimming Speeds
Spicelink Simulation" in Electrical Engineering Times, page 44, mentions an
IBIS driver addition to the Ansoft tool.

NEW MODELS AVAILABLE, LIBRARY UPDATE
Roy Leventhal reported no new updates since June. Stephen Peters remarked
that he had visited the model web page recently and thought that the look
and feel of the page was improved. Stephen thanked Roy for his upkeep of
the page.

OPENS FOR NEW ISSUES
None.

INTERNATIONAL/EXTERNAL PROGRESS
- IEC 62014-3 (ICEM) Integrated Circuit Electromagnetic Model Proposal
  (formerly, IEC 93/67/NP IBIS and EMC Simulation) - Stephen Peters needs
  to review the some comments on the Cookbook and Report document.

- JEDEC JC-16 - Modeling and Testing - No report.

- T10, Project 1414-DT - SCSI Signal Modeling (a Technical Committee of
  the National Committee for Information Technology (NCITS)) - No Report.

Because there have not been any reports from either the JC-16 committee or
the T10 SCSI Signal Modeling group in over a year, Stephen Peters announced
that we will drop these items from future agendas.

IBIS QUALITY COMMITTEE
Bob Ross reported that the IBIS Quality committee met on July 2, 2002
and again on July 16, 2002. The committee continues working on the
checklist, and expect to have it ready by the October summit meeting.
Greg Edlund, reading from the quality committee minutes, noted that one
topic for discussion has been the addition of a header at the top of the
IBIS file that would summarize what is in the check list.

Bob Ross mentioned that as a result of the IBIS parser update the parser
test cases have been uploaded on the Quality Web Site.

IBIS OPEN SOURCE PARSER PROPOSAL DISCUSSION
No report.

IBIS MODEL REVIEW COMMITTEE DISCUSSION
Bob Ross reported that he is previewing a model. It may be sent back to the
originator.

NEW ADMINISTRATIVE ISSUES
John Angulo reported that he has removed several old e-mail addresses from
the reflector mail list.

BIRD76 - Additional Information Related to C_comp Refinements
Stephen Peters introduced BIRD76 as an editorial correction to the IBIS 4.0
draft. The purpose of this bird was to clarify the usage of the additional
C_comp parameters introduced by BIRD65.2. Stephen emphasized that this BIRD
does not change any of the technical content or intent of the original
BIRD65.2, it only adds clarification language.

Changes include changing the name of two of the C_comp subparameters:
C_comp_power has been changed to C_comp_power_clamp and C_comp_gnd has been
changed to C_comp_gnd_clamp. In addition, the usage rules for the added
subparameters have been reworded to distinguish between the use of a
subparameter and the use of its value. A paragraph was also added that
clarifies what each added distributed capacitance represents (i.e. which
prototype circuit element the capacitance parallels). Finally, the last
paragraph under the [Rising Waveform] and [Falling Waveform] keyword
usage rules was updated to refer to the new C_comp subparameters.

Bob Ross had a few editorial comments.
1. Under sub-params: remove the word "and" from the list and add a missing
   comma
2. In the third change paragraph, change 'parameters' to 'subparameters'
4. In the second change paragraph, change references from I-V curves to I-V
tables.

Bob asked if there was a technical requirement that the usage of any of the
C_comp* subparameters implies the existence of the corresponding I-V table.
Arpad Muranyi replied that this was not the intent. After discussion,
a proposed wording was accepted that clarifies this point.

Finally, Bob requested that references to "simulator tool(s)" be changed
to "EDA tool(s)", and this change was accepted.

The motion was made and seconded to accept BIRD76 with the above revisions,
with the understanding that this BIRD would become part of the draft version
of IBIS 4.0. The motion passed unanimously. This BIRD will be posted as
BIRD 76.1 and Bob Ross will upload it to the web page.

IBIS VERSION 4.0 REVIEW AND VOTE
Stephen Peters opened the discussion by noting that the draft IBIS 4.0
specification is available under the Version 4.0 Work In Process link on
the IBIS web page under the file name of ver4_0wip1.txt.

  http://www.eda.org/pub/ibis/ver4.0_wip/

Stephen noted that he has received the following four editorial comments on
the current draft:

1) Under the [Model] keyword, remove the word "and" from the sub-parameter
list,

2) Change "f" to "if" in first paragraph of the [Series_switch] keyword
description,

3) Under the [Model Spec] keyword table description, change "spec" to
"specification",

4) Under the [Test Data] keyword description, the last sentence is
incomplete. Based on the original editorial update from Guy de Burgh, the
sentence should conclude with the word "originated."

Stephen then asked for any other editorial or technical comments on the
draft
specification. Bob Ross asked to remove any reference to SPICE, as this
term
has not been defined by the specification. After discussion the group
agreed
to replacing SPICE with the phrase 'circuit model'.

Bob Ross also noted the following:

-Change all dates for Copyright keywords from 1999 to 2002 in examples

-Change [File Name] name from ver3_2.ibs to ver4.0.ibs

-Under [Package Model] change in Usage Rules to
  ... Section 3, "GENERAL SYNTAX RULES AND GUIDELINES".

  - to be consistent with same phrase under [File Name]

-[Model Spec] example for Vref .. needs to be aligned with the rest
  of the subparameters

-Extra linefeed in [Receiver Thresholds] before Usage Rules:

-Under [Pulldown], [Pullup], [GND Clamp], [POWER Clamp] Other Notes:
 Change: To limit the complexity of the IBIS Version 2.x and Version 3.x
 syntax checking programs, ...
 To: To limit the complexity of the IBIS syntax checking programs, ...

-[Test Load] second example, remove the reference to the IBIS accuracy
 handbook section.

Stephen asked for a motion to accept IBIS 4.0 with the editorial revisions
noted above. It was so moved and seconded. The motion to accept IBIS 4.0
as amended passed unanimously. After the editorial updates have been done,
Bob Ross will upload the final IBIS version 4.0 specification to the web
site.

IBIS CONNECTOR & FUTURES GROUP REPORT
Stephen Peters reported that weekly meetings continue, with meetings held
July 9, and again on July 18, 2002. The next meeting is scheduled for
August 1, 2002. The group reviewed the ICM specification keywords and
subparameters for self consistency and consistency with the conventions
established by IBIS3.2. Numerous changes were made, and the latest
specification will be posted to the web site under the Connector Info
Link as ICM_999.txt

  http://www.eda.org/pub/ibis/connector/

The only remaining issue is including text that describes keyword
positioning
rules. The intent is to resolve this issue over the next week or so, then
at the August 1, 2002 meeting vote to release the specification to the IBIS
Open Forum for review and comment.

BIRD74.1 - EMI Parameters
Guy de Burgh had no update, and discussion was deferred to the next meeting.

BIRD75.2 - Multi-Lingual Modeling IBIS Modeling Support
BIRD77 - Differential Subparameter Additions
Bob Ross stated that BIRD75.2 and BIRD77 were both issued together as an
update to BIRD75.1. The major change prompting a separate BIRD77 is the
proposed additions of true differential model types:

  Input_diff, I/O_diff, 3-state_diff, and Output_diff

and two differential timing test loads:

  Rref_diff, Cref_diff.

These required documentation as subparameters within the existing [Model]
and [Model Spec] keywords. Furthermore, the differential timing test load
can be used as an extension to existing IBIS without any of the
Multi-lingual
extension of BIRD75.2.

On BIRD77, Bob noted several editorial comments were received at the IBIS
connector/futures group meeting, and he will incorporate them into a revised
BIRD77.1. These comments include clarifying the connection of the added
timing
test loads and adding an example of timing test load usage. Stephen Peters
also noted that the added model types are only applicable if the [External
Model] keyword is present, and that BIRD75 will have to be considered before
BIRD77.

Bob also covered a number of editorial improvements and changes in BIRD75.2
based on better tuning the capabilities to the needs. Bob mentioned that
the name of the "cell_port" subparameter were changed to "signal_pin".
For timing locations, the BIRD has reverted back to the current locations
used in IBIS version 3.2. Some of the prototype port names have also been
changed.

Bob proposed that we formally call for a vote at the next meeting on both
BIRDs.

IBISCHK3 & BUG TRACKING STATUS
Bob Ross reported that the source code for ibischk3.2.9 has been
distributed.
The executables have been generated and uploaded. BUG57 through BUG67
except
BUG59 and BUG62 were fixed.

Bob thanked Matthew Flora for distributing the source code and creating the
Windows executable. Thanks also go to Guy de Burgh and Lynne Green for the
Unix and Linux executables. The new executables are found at:

  http://www.eda.org/pub/ibis/ibischk3/

Finally, Bob Ross reported that Michael Mirmak of Intel has submitted a
revised test case for BUG68. This test case is shorter than the previous
file that demonstrated the problem.

NEXT MEETING:
The next teleconference meeting will be on August 9, 2002 from 8:00 AM to
10:00 AM Pacific Daylight Time. Votes are scheduled on BIRD75.2 and
BIRD77.1.
============================================================================

                                      NOTES

IBIS CHAIR: Stephen Peters (503) 264-4108, Fax: (503) 264-1831
            stephen.peters@intel.com
            Senior Hardware Engineer, Intel Corporation
            M/S JF4-215
            2111 NE 25th Ave.
            Hillsboro, OR 97124-5961

VICE CHAIR: Lynne Green (425) 788-0412, Fax (425) 451-1871
            lgreen@cadence.com
            Senior Modeling Engineer, Cadence Design Systems
            20 120th Ave NE, Suite 103, Bellevue, WA 98005-3016

SECRETARY: Guy de Burgh (805) 988-8250, Fax: (805) 988-8259
            gdeburgh@innoveda.com
            Senior Manager, Mentor Graphics
            1369 Del Norte Rd.
            Camarillo, CA 93010-8437

LIBRARIAN: Roy Leventhal (847) 590-9398
            roy.leventhal@ieee.org
            Consultant, Leventhal Design and Communications
            1924 North Burke Drive
            Arlington Heights, Illinois 60004

WEBMASTER: Syed Huq (408) 525-3399, Fax: (408) 526-5504
            shuq@cisco.com
            Manager, Hardware Engineering, Cisco Systems
            170 West Tasman Drive
            San Jose, CA 95134-1706

POSTMASTER: John Angulo (425) 497-5077, Fax: (425) 881-1008
            jangulo@innoveda.com
            Development Engineer, Mentor Graphics
            14715 N.E. 95th Street, Suite 200
            Redmond, WA 98052

This meeting was conducted in accordance with the EIA Legal Guides and EIA
Manual of Organization and Procedure.

The following e-mail addresses are used:

  majordomo@eda.org
      In the body, for the IBIS Open Forum Reflector:
      subscribe ibis <your e-mail address>

      In the body, for the IBIS Users' Group Reflector:
      subscribe ibis-users <your e-mail address>

      Help and other commands:
      help

  ibis-request@eda.org
      To join, change, or drop from either the IBIS Open Forum Reflector
      (ibis@eda.org), the IBIS Users' Group Reflector (ibis-users@eda.org)
      or both. State your request.

  ibis-info@eda.org
      To obtain general information about IBIS, to ask specific questions
      for individual response, and to inquire about joining the EIA-IBIS
      Open Forum as a full Member.

  ibis@eda.org
      To send a message to the general IBIS Open Forum Reflector. This
      is used mostly for IBIS Standardization business and future IBIS
      technical enhancements. Job posting information is not permitted.

  ibis-users@eda.org
      To send a message to the IBIS Users' Group Reflector. This is
      used mostly for IBIS clarification, current modeling issues, and
      general user concerns. Job posting information is not permitted.

  ibischk-bug@eda.org
      To report ibischk2/3 parser bugs. The Bug Report Form Resides on
      eda.org in /pub/ibis/bugs/ibischk/bugform.txt along with reported
      bugs.

      To report s2ibis, s2ibis2 and s2iplt bugs, use the Bug Report Forms
      which reside under eda.org in /pub/ibis/bugs/s2ibis/bugs2i.txt,
      /pub/ibis/bugs/s2ibis2/bugs2i2.txt, and
      /pub/ibis/bugs/s2iplt/bugsplt.txt respectively.

Information on IBIS technical contents, IBIS participants, and actual
IBIS models are available on the IBIS Home page found by selecting the
Electronic Information Group under:

  http://www.eigroup.org/ibis/ibis.htm

Check the pub/ibis directory on eda.org for more information on previous
discussions and results. You can get on via FTP anonymous.

============================================================================
-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Mon Jul 29 2002 - 04:29:56 PDT