[IBIS] Terminated buffer


Subject: [IBIS] Terminated buffer
From: Shee Kian Wong (SKWONG@altera.com)
Date: Thu Oct 10 2002 - 00:10:42 PDT


Hi IBIS users,

I'm currently modeling a terminated buffer (a buffer with built-in
termination resistor) but it seemed that the traditional method did not
work.
Does anyone has experience in modelling terminated driver and receiver (e.g.
gtl, sstl-3)?

Best Regards,
 
Shee Kian Wong
Applications Engineer
 
_____________________
Altera Corporation (M) S/B
Bayan Lepas Technoplex,
Medan Bayan lepas,
11900 Penang, Malaysia.
 
Tel: +604 636-6185
Fax: +604 642-8525

-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Thu Oct 10 2002 - 00:21:48 PDT