RE: [IBIS] DC and AC data mismatch error in IBIS


Subject: RE: [IBIS] DC and AC data mismatch error in IBIS
From: Tom Dagostino (tom@teraspeed.com)
Date: Mon Oct 21 2002 - 15:46:54 PDT


I change first point in the pulldown max from -2.22838e+00 to 2.2838e+00 and
the errors went away. This removed a non-monotonic issue in the curve. It
looks like a bug in the older version. The load line should be intersecting
the pulldown curve in the active region, not in the clamp region.
 The -6.58V message is the part that concerned me.

First few lines of the modidifed pulldown table:
[Pulldown]
| LVC161284_POUT_TP
|
| Voltage I(typ) I(min) I(max)
|
                       -5.5000e+00 -1.2691e+00 -7.8696e-01 -2.2838e
+00
                       -5.4950e+00 -1.2684e+00 -7.8640e-01 -2.2342e
+00
                       -3.6450e+00 -9.5146e-01 -5.7769e-01 -1.7026e
+00

Tom Dagostino
Device Modeling Division
Teraspeed Consulting Group LLC
2926 SE Yamhill St.
Portland, OR 97214
(503) 430-1065
tom@teraspeed.com
http://www.teraspeed.com

-----Original Message-----
From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org]On
Behalf Of Haque, Moshiul
Sent: Monday, October 21, 2002 1:47 PM
To: ibis@server.eda.org
Subject: [IBIS] DC and AC data mismatch error in IBIS

Hello All,
I am getting end point errors while running the IBISCHK 3.2.8 parser but no
end point warning or error if I check it with the 3.2.9. I am trying to find
out if this was a bug in the older version or is this something I need to
worry about.

Regards
Moshiul Haque
Standard Linear and Logic Marketing
Texas Instruments Incorporated
Ph: (903) 868-7153

-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Mon Oct 21 2002 - 16:00:00 PDT