[IBIS] About Vmeas


Subject: [IBIS] About Vmeas
From: Lior Aviv (RM18440@email.sps.mot.com)
Date: Tue Apr 08 2003 - 00:46:03 PDT


Hello,

Recently, I was asked to add the Vmeas parameter to an ibis model i'm
running.
It's definition is not clear at the ibis spec.
[ Reference voltage for timing measurements ] .
Is it the total output voltage the signal should climb to
or just a part of it?

Thanks ahead for your responses

Lior Aviv,
Motorola Semiconductor Israel.

-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Tue Apr 08 2003 - 00:57:20 PDT