Re: [IBIS] problem with the pin mapping

From: Vivek Kumar Sundriyal <Vivek.Kumar.Sundriyal@nsc.com>
Date: Tue Dec 21 2004 - 02:59:30 PST

Hi ,

 I have generated the IBIS model for an I/O buffer.. I get the correct
waveforms.
 However if i run IBISCHK4 on the IBIS Model, i get the following error.

ERROR - Component '32G0402': Pin Mapping Pin '2' not previously declared in Pin
section.
ERROR - Component '32G0402': Pin Mapping Pin '3' not previously declared in Pin
section.

[Pin] signal_name model_name R_pin L_pin C_pin
1 vss GND
| 2 DA dummy
| 3 EN dummy
6 vssio GND
7 vddio POWER
9 PAD iobuffer
12 vdd POWER
|
[Pin Mapping] pulldown_ref pullup_ref gnd_clamp_ref power_clamp_ref
|
1 DRV_GND NC
2 NC NC
3 NC NC
6 CLMP_GND NC
7 NC CLMP_VDD
9 DRV_GND DRV_VDD CLMP_GND CLMP_VDD
12 NC DRV_VDD

Now if i remove the comments from Pin name 2 and 3 from the pin section, than i
get the following error :-
ERROR - Component '32G0402': Model 'dummy' for Pin '2' not defined.
ERROR - Component '32G0402': Model 'dummy' for Pin '3' not defined.

How do i get over this error ?

Thx,
Vivek

-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
Received on Tue Dec 21 02:52:46 2004

This archive was generated by hypermail 2.1.8 : Tue Dec 21 2004 - 02:55:58 PST