RE: [IBIS] Open Drain models

From: Beal, Weston <weston_beal_at_.....>
Date: Thu Mar 03 2005 - 09:33:45 PST
read the IBIS specification. 

What does it mean to have an open drain input?


-----Original Message-----
From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of
Mithlesh Shrivas
Sent: Thursday, March 03, 2005 5:45 AM
To: ibis-users@eda.org; ibis
Subject: [IBIS] Open Drain models

Hi Experts,
                    Can the "open_drain" pin be treated  as input or
output only ? How can it be defined it in the ibis file? I have
generated Open_drain models and now I need them as input/output type
too.

Is the following syntax correct ?
model_type        Input_Open_drain ?
model_type       Output_Open_drain ?

with best regards,
Mithlesh

-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Thu Mar 3 09:33:50 2005

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2005 - 09:35:05 PST