[IBIS] [IBIS-Users] How to describe the differential pair in EBD?

From: YoungSeok Hong <youngs.hong_at_.....>
Date: Mon Mar 07 2005 - 16:15:05 PST
Samsung Enterprise Portal mySingle

Hi, experts!

 

I'm trying to make an EBD model. But I have a problem with the differential pair description.

Let us suppose that the diff. pair is like follwoing (there is a loop)

Can anyone let me know how to  describe ?

 

Thanks.

Young-Seok

 

Pin 1 -----Length a -----------Node R1.1-----------Length b---------Length C1.1------------Node 1

                                                     |                                                           |

Pin 2 -----Length c -----------Node R1.2-----------Length d---------Length C1.2------------Node 2

 

[Path Description]

Pin1

Len a /

  Fork

  Node R1.1

  Node R1.2

    Fork

    Len c /

    Pin 2

    Endfork

  Len d /

  ???

 

==================================

Young-Seok Hong

Memory Division

Device Solution Network

SAMSUNG ELECTRONICS CO., LTD.

E-mail : youngs.hong@samsung.com

==================================

----------------------------------------------------------------- |For help or to subscribe/unsubscribe, email majordomo@eda.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or email a request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 Received on Mon Mar 7 16:15:09 2005

This archive was generated by hypermail 2.1.8 : Mon Mar 07 2005 - 16:16:23 PST