[IBIS] Comments on BIRD97.

From: Itzik Peleg <itzikpe_at_.....>
Date: Tue Mar 15 2005 - 00:37:02 PST
Hello All

 

I would like to comment on BIRD97:

1.	I think that we should add quadratic parameter since the start
of the transition (when thinking of a transistor) is done in the
saturation regain and there the connection between VGS and VDS is
quadratic.
2.	Since in the end of the drive the transistor is in the Ohmic
region the connection is linear so adding one or more parameters to
separate the two regions or use a table.   

 

--
Regards
 
Itzik Peleg
Board Technology Group
 
***********************************************************
Please Note: email address change to: itzikpe@marvell.com
***********************************************************
 
Marvell Semiconductor Israel Ltd
6 Hamada Street 




Mordot HaCarmel Industrial Park




Yokneam 20692, ISRAEL
Email - itzikpe@marvell.com
Tel   - +972 4  9091192
Cell  - +972 54 4452482
Fax   - +972 4  9091501
WWW Page: http://www.marvell.com <BLOCKED::http://www.marvell.com> 
========================================================================
This message may contain confidential, proprietary or legally privileged
information. The information is intended only for the use of the
individual or entity named above. If the reader of this message is not
the intended recipient, you are hereby notified that any dissemination,
distribution or copying of this communication is strictly prohibited.
If you have received this communication in error, please notify us
immediately by telephone, or by e-mail and delete the message from
your computer.
 
Thank you!
========================================================================

 


-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Tue Mar 15 00:37:22 2005

This archive was generated by hypermail 2.1.8 : Tue Mar 15 2005 - 00:38:04 PST