RE: [IBIS] *-AMS solves all of IBIS problems?

I looked through a particular HSPICE circuit in which I thought I was using
.measure outputs as inputs to controlled source element equations. Arpad is
right, I was wrong. The circuit simulates for the better part of a day, but
not because it is trying to adjust to it's own measurements. That can't be
done.

Mike

-----Original Message-----
From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Muranyi,
Arpad
Sent: Monday, April 04, 2005 5:12 PM
To: ibis
Subject: RE: [IBIS] *-AMS solves all of IBIS problems?

Mike,

Which version of HSPICE are you referring to?  As far as I know there is no
way in HSPICE to use the results of a .measure statement as input to any
other element, because HSPICE does things in two passes.  1) simulate, 2)
process the .measure statements.  Am I missing something?

...

Arpad
---------------------------------------------------------------------
-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993