[IBIS] RE: [IBIS-Users] S2IBIS code compiling in Linux

From: Vivek Kumar Sundriyal <Vivek.Kumar.Sundriyal_at_.....>
Date: Thu Sep 22 2005 - 19:52:31 PDT
Sanjay ,

In the file, s2ispice.c , there is an sprintf statement ( approximatly at line
2175 ).
Comment that statement and replace it with this code :

sprintf( dummyBuffer, resString[spiceType], "RFIXS2I", nodeList[nodeIndex],
         nodeList[nodeIndex+1], currentWave_P->R_fixture );
nodeIndex++ ;

This should solve the problem.

Thanks ,

Vivek



                                                                                                                   
                      "Sanjay Mehta"                                                                               
                      <sanjay.mehta@xil        To:       "Vivek Kumar Sundriyal" <Vivek.Kumar.Sundriyal@nsc.com>   
                      inx.com>                 cc:       ibis@eda.org, ibis-users@eda.org,                         
                                                owner-ibis-users@eda.org                                           
                      09/22/05 08:02 PM        Subject:  RE: [IBIS-Users] S2IBIS code compiling in Linux           
                                                                                                                   
                                                                                                                   




Hi Vivek,

I will definitely try s2ibis3. But would definitely be interested in knowing the
changes you made in the source code for s2ibis2.

- Sanjay

From: Vivek Kumar Sundriyal [mailto:Vivek.Kumar.Sundriyal@nsc.com]
Sent: Wed 9/21/2005 8:14 PM
To: sanjay.mehta
Cc: ibis@eda.org; ibis-users@eda.org; owner-ibis-users@eda.org
Subject: Re: [IBIS-Users] S2IBIS code compiling in Linux



Sanjay ,

This is a problem that I too had faced when I used to use s2ibis2 on linux. To
get over this problem, you need to make some slight changes in the source code
of s2ibis2. It then works fine.

But , Is there any specific reason you need to work on s2ibis2 ?

I suggest you to move to s2ibis3, which is in Java and hence OS independent. I
observed that the results of the Pullup/Pulldown results are better in s2ibis3.

Download the latest s2ibis3 and try working on that.


Cheers ,

Vivek





                      "Sanjay Mehta"

                      <sanjay.mehta@xil        To:       ibis-users@eda.org,
ibis@eda.org
                      inx.com>                 cc:

                      Sent by:                 Subject:  [IBIS-Users] S2IBIS
code compiling in Linux
                      owner-ibis-users@

                      eda.org



                      09/22/05 12:07 AM







Hi,

I have been trying to compile the linux version of the S2IBIS code that
is posted on the IBIS website. The code compiles without any errors (I
am using Redhat Enterprise Linux WS 3). Unfortunately, I am having
problems in getting the correct V-t tables when I use this script. Upon
execution of the binary s2ibis, the IBIS model is generated; however,
the V-T table is incorrect. The problem seems to be the following:

In the *.sp files that the are created with the S2IBIS script, which
generate the V-T curves (i.e. a00io.sp, a01io.sp....z00io.sp, z01io.sp)
there is a line that states...

RFIXS2I dum13806 dum13806 50

Normally, this line should read

RFIXS2I pin  dum13806 50   --> where "pin" is the IO pad that is being
swept for the I-V and connected to the R-fixture for the V-T.

Unfortunately, I cannot run the default executable on the website as I
am using a special in-house version of HSPICE and so I have recompile
the code with the correct addition of the HSPICE command line.

If there is anyone who has been successful at compiling in Linux and
have some suggestions, please let me know. Thank you.

Sanjay Mehta
Xilinx, Inc.


|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993









-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Thu Sep 22 19:53:10 2005

This archive was generated by hypermail 2.1.8 : Thu Sep 22 2005 - 19:56:27 PDT