RE: [IBIS] Differential Buffer Modelling

From: Muranyi, Arpad <arpad.muranyi_at_.....>
Date: Mon Oct 03 2005 - 08:49:13 PDT
Kong-Yew,
 
1)  You are correct.  You would use Idiff and Vdiff for the table
    in [Series Current].
2)  You should use the same response (except with negative polarity)
    for the cancellation that you will use in your final model.  If
    it was an [R Series], use a negative resistance, if it was [Series
    Current], use the same PWL table (with the signs reversed).
 
I hope this helps.
 
Arpad Muranyi
Intel Corporation
=======================================================================

________________________________

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Kong Yew Chan
Sent: Monday, October 03, 2005 6:21 AM
To: ibis-users@eda.org; ibis@eda.org
Subject: [IBIS] Differential Buffer Modelling



IBIS Gurus,

 

I have some questions about generating differential buffer model as stated in latest Cookbook 4.0.

1)          My normalized differential mode current has a similar plot as shown in Pg 36. It's a function of the differential voltage, so that makes the usage of keyword [Series Current] appropriate in this case. To fill the I-V table, am I supposed to use the Vdiff vs Idiff ?

2)          For the V-T table data extraction, it was mentioned in Pg 40 that for [Series Current] keyword, PWL current source can be used to replace the R value. What should be the PWL response to represent the Idiff? (Idiff was only found to be a function of Vdiff from I-V extraction). 

 

Please advise if my assumptions are incorrect.  

 

Thanks

Kong-Yew


-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Mon Oct 3 08:49:22 2005

This archive was generated by hypermail 2.1.8 : Mon Oct 03 2005 - 08:51:03 PDT