[IBIS] Re: R-Load

From: Andrew Ingraham <a.ingraham_at_.....>
Date: Thu Dec 22 2005 - 08:18:11 PST
> I had this query as to why we need to model the buffers with R-load
> as in most of the cases it is c-load w/without TL line is
> driven by the buffer).
>
> does it reflect on the TL impedence that it drives? (50ohm environment)

I think you hit the nail right on the head.

If the buffer drives a transmission line that is 3 ns long, the device sees
an effective load of Zo (typically in the vicinity of 50-80 ohms) for the
first 6 ns after it switches.

Regards,
Andy


-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Thu Dec 22 08:18:33 2005

This archive was generated by hypermail 2.1.8 : Thu Dec 22 2005 - 08:21:22 PST