[IBIS] RE: [IBIS-Users] issue in VT extraction

From: Muranyi, Arpad <arpad.muranyi_at_.....>
Date: Thu Feb 02 2006 - 08:35:59 PST
Kiran,
 
Which simulator did you use when
you made this waveform?
 
Arpad
================================


________________________________

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of seshadri.kirankumar@wipro.com
Sent: Thursday, February 02, 2006 3:19 AM
To: ibis-users@eda.org; ibis@eda.org
Subject: [IBIS-Users] issue in VT extraction



Hi IBIS Experts,

 

    I have an query  in IBIS modeling about extracting VT data, 

I am generating model for one buffer which is having its output swing from +0.21V to -0.21V, But as you see in the Plot for 

Rising (if the i/p pulse is Rising ) then it is giving proper switching (Red coloured) 

But in Falling (if the i/p pulse is falling) then for  1 st pulse it is not going down and reaching to -0.21V even I tried giving very low frequency i/p signal(Green coloured).

 

Here my doubt is why IBIS takes first 1/4 th of Pulseperiod of i/p signal, is there any reason in that? 

 

 If there is no any constraint on this  as I am seeing the good performance in second pulse onwards I can do  a X-axis shift (Time shift) of the second Falling Pulse.

 

I wanted this clarification because I am not aware of internal architecture which causing this problem in the netlist(input) which I am using for generation.

 

Thanks in Advance

 

Best Regards

Kiran Kumar

 


The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. 

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

www.wipro.com
	

-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Thu Feb 2 08:36:13 2006

This archive was generated by hypermail 2.1.8 : Thu Feb 02 2006 - 08:41:55 PST