Re: [IBIS] Open drain strange behaviour

Hello Michael

  thanks for your feedback.
  In my Open drain Ibis model there is no extra delay portion,
  because I have inserted as falling and rising waveform tables
  the result of transistor level simulation, that I am considering
  for comparison.
  I obtain this delay both Eldo and Hspice simulation.

  Best regards

             Roberto

Michael Schaeder wrote:

>Hello Roberto,
>
>I guess there is an extra delay portion in the
>[Rising/Falling Waveform]s of your IBIS model.
>
>Regards, Mic.
>
>Monday, September 11, 2006, 2:17:18 PM, you wrote:
>
>  
>
>>Hello everybody
>>
>>  I 'd like to have some information about a strange behaviour of Open
>>drain buffer
>>  Ibis model. I have noticed a mismatch between Transistor level and 
>>Ibis model
>>  voltage output during a transient analysis. In fact in presence of the
>>same input voltage
>>  wave and the same value of load resistance (for example 70 ohm),
>>  we can observe a delay between TL output and Ibis output. This delay
>>is the same
>>  if we change the value of  load resistance. What is the cause of this
>>strange behaviour?
>>
>>  Thanks and best regards
>>
>>        Roberto Izzi
>>    
>>
>--
>Dipl. Ing. Michael Schaeder                   Tel: +49 5251-150-670
>Zuken - EMC Technology Center                 Fax: +49 5251-150-700
>Vattmannstrasse 3             E-mail: Michael.Schaeder@pad.zuken.de
>D-33100 Paderborn                                Web: www.zuken.com
>Germany              PGP Key: http://mail.pad.zuken.de/~mic/msc.asc
>
>--------------------------------------------------------------------
>|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
>|with the appropriate command message(s) in the body:
>|
>|  help
>|  subscribe   ibis       <optional e-mail address, if different>
>|  subscribe   ibis-users <optional e-mail address, if different>
>|  unsubscribe ibis       <optional e-mail address, if different>
>|  unsubscribe ibis-users <optional e-mail address, if different>
>|
>|or e-mail a request to ibis-request@eda-stds.org.
>|
>|IBIS reflector archives exist under:
>|
>|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
>|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
>|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
>  
>


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993