Mike: You have a point, and we will investigate further. Although the new report identifies the tables by buffer name, the line numbers do provide specific, useful information and probably should have been included in the Note for each table. Bob Mike LaBonte (milabont) wrote: > I am a bit surprised by the lack of line numbers in the 4.2.1 version output: > > ==> Example_of_IBISCHK4_V4.1.1_Report.txt <== > IBISCHK4 V4.1.1 > > Checking hyb18t512xx0bf_rev18.ibs for IBIS 3.2 Compatibility... > > WARNING (line 921) - Pulldown Maximum data is non-monotonic > WARNING (line 922) - Pulldown Typical data is non-monotonic > WARNING (line 924) - Pulldown Minimum data is non-monotonic > WARNING (line 983) - Pullup Maximum data is non-monotonic > WARNING (line 984) - Pullup Typical data is non-monotonic > WARNING (line 985) - Pullup Minimum data is non-monotonic > > ==> Example_of_IBISCHK4_V4.2.1_Report.txt <== > IBISCHK4 V4.2.1 > > Checking hyb18t512xx0bf_rev18.ibs for IBIS 3.2 Compatibility... > > NOTE - Pulldown for Model: INOUT_WEAK Typical data is non-monotonic > NOTE - Pullup for Model: INOUT_WEAK Typical data is non-monotonic > NOTE - Pulldown for Model: INOUT_WEAK Minimum data is non-monotonic > NOTE - Pullup for Model: INOUT_WEAK Minimum data is non-monotonic > NOTE - Pulldown for Model: INOUT_WEAK Maximum data is non-monotonic > NOTE - Pullup for Model: INOUT_WEAK Maximum data is non-monotonic > > > The new format may be more useful in some ways, but the old format identified the exact point where non-monotonicity begins. Also I find nothing in the parser bug list indicating this would change. In fact, BUG 94 says: > > "The reason for retaining the individual I/V curve checks is that they can be useful for diagnosing the source of the combined non-monotonicity, and these checks print the line number in the file." > > Was there any discussion of this change that I missed? > > Mike > > -----Original Message----- > From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Radovan.Vuletic@qimonda.com > Sent: Wednesday, April 25, 2007 6:56 AM > To: michael.mirmak@intel.com; ibis@eda-stds.org; ibis-users@eda-stds.org > Subject: [IBIS] RE: [IBIS-Users] IBISCHK4 parser updated; IBIS 4.2 now an ANSI specification > > Hi experts, > > is it possible that there is a bug in this latest IBISCHK4 (v4.2.1) version? > > I am checking one IBIS model and then I get a whole bunch of warnings that I can't explain, like: > "WARNING - Pin B1 is not defined as a Diff Pin though the associated Model Selector INOUT was determined to be Differential" > > When is one pin considered to be differential? I assume only in [Diff Pin] section, but now it seems that it is looking for something else .... and I don't know what .... > > With old version of IBISCHK4 (v4.1.1) I get no such funny warnings. > > For your convenience I have attached the outputs of both spelling checkers (parsers). > > Regards, > Radovan > > > ============================================================================== > Qimonda AG > Chairman of the Supervisory Board/ Aufsichtsratsvorsitzender: Peter J. Fischl Management Board/ Vorstand: Kin Wah Loh (Chairman/ Vorsitzender), Dr. Michael Majerus, Thomas J. Seifert Register Court/ Registergericht: München HRB 152545, Seat/ Sitz: München ============================================================================== > > > > > -----Original Message----- > From: owner-ibis-users@server.eda.org [mailto:owner-ibis-users@server.eda.org] On Behalf Of Mirmak, Michael > Sent: Sunday, April 22, 2007 7:53 AM > To: ibis@server.eda-stds.org; ibis-users@server.eda-stds.org > Subject: [IBIS-Users] IBISCHK4 parser updated; IBIS 4.2 now an ANSI specification > > > The IBIS Open Forum is pleased to announce that the IBISCHK4 parser, version 4.2.1, is on-line and available for download! Compiled executables for Linux (SuSE), Microsoft DOS/Windows and Sun operating systems can be found at: > > http://www.eda.org/pub/ibis/ibischk4/ > > Additional compilations will be posted as they become available. Parser license purchasers will receive the source code shortly. > > Note that this version addresses all known parser bugs and implements the new "Caution" flag. > > Parser issues may be reported using the "bugform.txt" template at: > > http://www.eda.org/pub/ibis/bugs/ibis_bugs/ > > Please send completed issue reports to ibis-bug@eda.org. > > In addition, we have received confirmation that, with the close of the comment period, IBIS 4.2 is now an official ANSI specification, as of March 9, 2007! Its official designation is ANSI/EIA-656-B. > > Thanks to our contributors, members and users for their support! > > - Michael Mirmak > Intel Corp. > Chair, EIA IBIS Open Forum > > -- > This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. > > > -------------------------------------------------------------------- > |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org > |with the appropriate command message(s) in the body: > | > | help > | subscribe ibis <optional e-mail address, if different> > | subscribe ibis-users <optional e-mail address, if different> > | unsubscribe ibis <optional e-mail address, if different> > | unsubscribe ibis-users <optional e-mail address, if different> > | > |or e-mail a request to ibis-request@eda-stds.org. > | > |IBIS reflector archives exist under: > | > | http://www.eda-stds.org/pub/ibis/email_archive/ Recent > | http://www.eda-stds.org/pub/ibis/users_archive/ Recent > | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 > > -- > This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. > -- Bob Ross Teraspeed Consulting Group LLC Teraspeed Labs 121 North River Drive 13610 SW Harness Lane Narragansett, RI 02882 Beaverton, OR 97008 401-284-1827 503-430-1065 http://www.teraspeed.com 503-246-8048 Direct bob@teraspeed.com Teraspeed is a registered service mark of Teraspeed Consulting Group LLC -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Fri Apr 27 10:01:32 2007
This archive was generated by hypermail 2.1.8 : Fri Apr 27 2007 - 10:02:00 PDT