[IBIS] Simulate IBIS model with RLC network in HSpice

From: lau yy <tok47_at_.....>
Date: Sat May 19 2007 - 21:39:24 PDT

Hi ALL,


Currently, I have an IBIS model. And now I need to simulate the model with RLC network for all the pins in HSpice.

In HSpice setting, I set like this :

B_INPUT nd_pc nd_gc nd_in nd_out_of_in
+ file='filename' model='model_name'
+ [typ={typ|min|max|fast|slow}] [power={off}]
+ [buffer={1|input}]
+ [interpol={1|2}]
+ [nowarn]

But, how can I connect the RLC network to this pin?

Thanks


rdgs
yylau




Catch suspicious messages before you open them—with Windows Live Hotmail.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 Received on Sat May 19 21:39:46 2007

This archive was generated by hypermail 2.1.8 : Sat May 19 2007 - 21:42:23 PDT