[IBIS] Re: [IBIS-Users] EBD file syntax

From: Bob Ross <bob_at_.....>
Date: Thu Aug 23 2007 - 12:22:57 PDT
Hi Nam:

I agree with Randy's response that C3 is to ground.

I want to add that the EBD format also has syntax rules to
bring in Series models (such as a series capacitor), if that
is needed for some other configuration.

Bob

rrwolff@micron.com wrote:
> Nam,
>  
> Your syntax looks fine to me.  Capacitor C3 would be to an ideal 
> ground.  In fact, all capacitors are connected to an ideal ground, even 
> in the transmission line case, where the capacitance is part of a 
> transmission line that references ideal ground.
>  
> Regards,
> Randy
>  
> 
> Randy Wolff
> SI Modeling Manager
> Signal Integrity R&D Group
> Micron Technology, Inc.
> 
> 
> ------------------------------------------------------------------------
> From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On 
> Behalf Of Nguyen, Duynam
> Sent: Wednesday, August 22, 2007 1:25 PM
> To: ibis@eda.org
> Cc: ibis-users@eda.org
> Subject: [IBIS-Users] EBD file syntax
> 
>  
> 
> Dear expert,
> 
> I am trying to describe the following situation in an EBD file: a signal 
> net that goes from a die pad to a package pin A9. Physically, this 
> signal net consists of two traces. Each trace is on a different layer 
> and they are connected together by a via which is modeled as a small 
> capacitor of value c3 to ground. The die
> 
> pad and the package pin are modeled by a series L and a grounded C.
> 
> My EBD file attempt is depicted as follows
> 
>  
> 
> [Path Description] SIGNAL_NAME
> 
> Pin A9
> 
> Len = 0            L = l1 C = c1               /
> 
> Len = length2   L=l2   C = c2    R=r2     /
> 
> Len = 0                     C = c3                /         ç Allowed ?
> 
> Len = length4  L=l4    C = c4    R=r4     /
> 
> Len = 0           L = l5  C = c5                /
> 
> Node DIE.5085      
> 
>  
> 
> I have 2 questions:
> 
> 1. About the representation of the capacitance c3 in the EBD file, do I 
> violate any EBD file specification by doing this ?
> 
>    Assuming the specification allows it, would the capacitance c3 be 
> interpreted as grounded or in-series  ?  
> 
> 2. If the representation of the capacitance c3 as above is not allowed, 
> can I take out the offending line and the rest is still permitted ?
> 
>    In other words, there are still two traces with an electrical 
> discontinuity connecting them as follow:
> 
> [Path Description] SIGNAL_NAME
> 
> Pin A9
> 
> Len = 0            L = l1 C = c1               /
> 
> Len = length2   L=l2   C = c2    R=r2     /
> 
> Len = length4  L=l4    C = c4    R=r4     /
> 
> Len = 0           L = l5  C = c5                /
> 
> Node DIE.5085      
> 
>  
> 
> Thank you much,
> 
> Nam
> 
> 
> -- 
> This message has been scanned for viruses and
> dangerous content by MailScanner <http://www.mailscanner.info/>, and is
> believed to be clean.
> 
> -- 
> 
> This message has been scanned for viruses and
> 
> dangerous content by MailScanner <http://www.mailscanner.info/>, and is
> 
> believed to be clean.


-- 
Bob Ross
Teraspeed Consulting Group LLC     Teraspeed Labs
121 North River Drive              13610 SW Harness Lane
Narragansett, RI 02882             Beaverton, OR 97008
401-284-1827                       503-430-1065
http://www.teraspeed.com           503-246-8048 Direct
bob@teraspeed.com

Teraspeed is a registered service mark of Teraspeed Consulting Group LLC


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Fri Aug 24 11:44:06 2007

This archive was generated by hypermail 2.1.8 : Fri Aug 24 2007 - 11:45:04 PDT