[IBIS] [Ibis] How to model an output buffer with internal pulldown resistor

From: Gooi Han Chiou <hcgooi_at_.....>
Date: Thu Oct 18 2007 - 19:54:03 PDT
Hi all,

  I need to model an output buffer having transistor as pullup element,
while a internal pulldown resistor as pulldown element, how should I model
this type of buffer?

-- 
Best Regards,
Gooi Han Chiou

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Thu Oct 18 19:54:18 2007

This archive was generated by hypermail 2.1.8 : Thu Oct 18 2007 - 19:55:18 PDT