> Please send me the IBIS model for any > oscillator(with any pin configuration) that is > available with you so that i can get an idea of the > parameters that i had to concentrate on. Please send > me as early as possible. Take any IBIS model for any output pin, and there you go. It will model an oscillator that has that kind of output buffer. Thus, you want to find an IBIS model for the kind of logic device used as the output buffer in the oscillator you are looking at. Andy -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Sat Dec 15 05:31:48 2007
This archive was generated by hypermail 2.1.8 : Sat Dec 15 2007 - 05:32:21 PST