[IBIS] IBIS model behaviour between Vinh and Vinl input

From: Akhilesh CHANDRA <akhilesh.chandra_at_.....>
Date: Tue Jan 01 2008 - 22:11:33 PST
 Hello Experts,

   I am using IBIS model of hysterics cell. In my model Vinh and Vinl have
different values as per design specs. When I run it with one of the
simulator then it show output at constant voltage(VDDE/2) between Vinh and
vinl inputs, while spice show continuous behavior with same simulator so
there is big mismatch between IBIS and spice result.
   Can anyone explain us what IBIS standard say about output behavior
between Vinh and Vinl input values.

Regards
Akhilesh



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Tue Jan 1 22:12:03 2008

This archive was generated by hypermail 2.1.8 : Tue Jan 01 2008 - 22:12:58 PST