[IBIS] RE: [IBIS-Users] ibischk4

From: Lynne D. Green <lgreen22_at_.....>
Date: Mon Mar 17 2008 - 11:52:26 PDT
Hello, Chetana,
 
Here are some of the reasons behind these naming limits.
 
* Case sensitivity of file name: some operating systems (such as Windows) do
not recognize a case difference in a file name, while others (UNIX, Linux)
do.  To make file names behave consistently for all IBIS tools, file names
must all be lower case.
 
* File name length is consistent with file name limits in earlier operating
systems (8.3, for a total of 9 characters).  Some tools might still have
this coded into their operation.  One could check to see whether a BIRD has
been filed to have this increased.  The page with the IBIS specification
includes a list of BIRDs and instructions on how to file a new BIRD.
 
* Length limits on names (model names, etc.): The line length limit is 120.
Some tools might not read past the 120th character in a line.
 
* To preserve IP names, one can put them in comments in a line above the
component or model name.  One could also include a name matching list in the
[Notes] for further documentation.
 
Best regards,
Lynne
 
 
"IBIS training when you need it, where you need it."
 
Dr. Lynne Green
Green Streak Programs
http://www.greenstreakprograms.com
425-788-0412
lgreen22@mindspring.com
 
 
 
 


  _____  

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf
Of Chetana Raghuwanshi
Sent: Monday, March 17, 2008 4:51 AM
To: ibis-users@eda.org; ibis@eda.org
Subject: [IBIS-Users] ibischk4



Hello All,



While running ibischk4 on IBIS Models, 


I come accross some errors related to file name and model name. 


Ex: If file name / model name is too long, error is 


"File_name string is too long, truncating to 12 characters" 


"File_name contains an upper case character " 


"Model name string is too long, truncating to 20 characters"

Is there any way I can get rid of these errors without changing the IP name
and model name ?

What is the reason behind having this constraint on file / model names ?

Thanks

Best Regards
Chetana
-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Mon Mar 17 11:57:00 2008

This archive was generated by hypermail 2.1.8 : Mon Mar 17 2008 - 11:57:14 PDT