Hello Experts, I am developing IBIS model for a cell which is NMOS open drain type. I have configured it as an output ibis model as the pullup resitor and pullup voltage values are fixed. The problem is that the spice curve is not smooth and there seems to be sudden change in voltage around 1.4 Volts. The ibis simulator is not able to replicate this behaviour. The comparison between spice and ibis with load=30pf is attached with this mail with the name spicevsibis. I have tried a lot but this behaviour of spice is not reproduced by ibis. I am attaching the ibis file I have developed with this mail. Kindly tell me what can be done to improve the performance of this ibis file. Thanks and Regards Amit -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2.1.8 : Mon Jun 23 2008 - 04:24:53 PDT