RE: [IBIS] pwr/gnd clamp voltage range -vdd to 2vdd;

From: Mike LaBonte (milabont) <milabont_at_.....>
Date: Fri Jun 27 2008 - 08:39:19 PDT
The -VDD to 0 range of the IBIS [Power Clamp] is actually +VDD to +2VDD
in the "real" world.
 
Mike

________________________________

From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On
Behalf Of Muranyi, Arpad
Sent: Thursday, June 26, 2008 11:38 AM
To: ibis-users@server.eda.org; ibis@server.eda-stds.org
Subject: RE: [IBIS] pwr/gnd clamp voltage range -vdd to 2vdd;


Which "tool" are you using for this?
 
Arpad
=====================================

________________________________

From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On
Behalf Of Nekkondi, Hima
Sent: Thursday, June 26, 2008 12:39 AM
To: ibis-users@server.eda.org; ibis@server.eda-stds.org
Subject: [IBIS] pwr/gnd clamp voltage range -vdd to 2vdd;



Hi Experts,

 

 I wanted to create the voltage range for PWR/GND CLAMP from -VDD to
+2VDD ,

 but the tool generated voltage range is -Vcc to Vcc(GND_Clamp) & -Vcc
to 0(PWR_Clamp). 

Can any one let me know how can i get the voltage range (-VDD to +2VDD).

 

 

Regrads,

Hima.


-- 
This message has been scanned for viruses and 
dangerous content by MailScanner <http://www.mailscanner.info/> , and is

believed to be clean. 
-- 
This message has been scanned for viruses and 
dangerous content by MailScanner <http://www.mailscanner.info/> , and is

believed to be clean. 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Fri Jun 27 08:40:44 2008

This archive was generated by hypermail 2.1.8 : Fri Jun 27 2008 - 08:40:52 PDT