RE: [IBIS-Users] RE: [IBIS] input signal for model usage

From: Fabio BRINA <fabio.brina_at_.....>
Date: Tue Mar 17 2009 - 06:00:06 PDT
 
Thank you Muniswar,
 
 could you confirm (or correct) these propositions? :
 
 - if I change only rise/fall slew at the input (A_in as you say)
   the Output response is the same. (could be only a little shift time in
the Output?)
 
 - if I change the input clock frequency (fck), the Output response is
correct
   until fck is under the frequency used in the V-T tables generation.
   (if I want to use an higher clock frequency, I have to generate a new
model
    with differents V-T tables)
 
 are that right?
 
 many thanks,
 
 Fabio
 
 

  _____  

From: owner-ibis-users@server.eda.org
[mailto:owner-ibis-users@server.eda.org] On Behalf Of Muniswara Reddy Vorugu
Sent: Tuesday, March 17, 2009 12:00 PM
To: Fabio BRINA; ibis-users@server.eda.org; ibis@server.eda.org
Subject: [IBIS-Users] RE: [IBIS] input signal for model usage



Hi,

The OUTPUT of I/O ( IBIS model)  does not depend on the Rise/Fall slew at
the input of I/O ( say A_in ).

 

If you mean. Can you have different  LOW/HIGH duration? 

You can give different clock/pulse frequency, but there is an upper limit of
the clock.

The upper limit of the clock frequency is limited by the duration of the V-T
tables/Ramp time.

 

Thanks,

Muniswar

 

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Fabio
BRINA
Sent: Tuesday, March 17, 2009 3:55 PM
To: ibis-users@eda.org; ibis@eda.org
Subject: [IBIS] input signal for model usage

 

Hello IBIS experts, 

 

 Once an IBIS model has been created, can be used in different Input speeds?

 

 In other words: if I consider an I/O model, Can I use every input Pulse
with

 several rise/fall time Or I have to use only the same pulse used in the 

 model creations?

 

I hope is clear what I mean.

 

Thanks,

Fabio

 

 


-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 

 
-- 
IMPORTANT NOTICE: The contents of this email and any attachments are
confidential and may also be privileged. If you are not the intended
recipient, please notify the sender immediately and do not disclose the
contents to any other person, use it for any purpose, or store or copy the
information in any medium. Thank you. 
-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Tue Mar 17 06:01:24 2009

This archive was generated by hypermail 2.1.8 : Tue Mar 17 2009 - 06:02:13 PDT