[IBIS] RE: [IBIS-Users] IBIS version 4.2

From: Lynne D. Green <lgreen22_at_.....>
Date: Mon Apr 20 2009 - 12:38:53 PDT
Hello, Shantala,
 
There is one significant change in data interpretation between 3.2 and 4.x.
 
In 3.2, it was up to the tool/user to decide how to interpret V-t tables
that did not have the same starting time.  (Typically, one V-t table would
start at 0nsec and the other at 50nsec or more.)  In 4.x, both tables are
assumed to start at 0nsec, no matter what the first time point in the table
is.  This pushes the responsibility for "backing out" any SPICE effects on
the model maker, rather than the tool/user.
 
Personally, I find it useful to set [IBIS Ver] to 4.2 for parsing, since the
additional messages can be helpful.  Of course, I also parse with the
original [IBIS Ver] in the model file.
 
Best regards,
Lynne
 
 
"IBIS training when you need it, where you need it."
 
Dr. Lynne Green
Green Streak Programs
http://www.greenstreakprograms.com
425-788-0412
lgreen22@mindspring.com


  _____  

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf
Of shantala hegde
Sent: Monday, April 20, 2009 6:58 AM
To: ibis-users@eda.org; ibis@eda.org
Subject: [IBIS-Users] IBIS version 4.2


Hi all,

Does IBIS ver 4.2 supports models generated with 3.2.What are the extra
feauters with 4.2 version.

For example, if I have generated the model with 3.2 version and later if I
change the version to 4.2, will it be compatiable with 4.2 checks.

To what extent will it affect the end users.

Please let me know on this.

Thanks,
Shantala

-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Mon Apr 20 12:48:15 2009

This archive was generated by hypermail 2.1.8 : Mon Apr 20 2009 - 12:49:54 PDT