[IBIS] Re: Ibis model Receiver help.

From: Andrew Ingraham <a.ingraham@ieee.org>
Date: Thu Nov 04 2010 - 20:50:48 PDT

> I need to represent the AC coupling and termination
> circuit.

Why do you need to do that? Isn't it sufficient to represent how the
receiver appears from the pins?

Regards,
Andy

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Thu Nov 4 20:51:46 2010

This archive was generated by hypermail 2.1.8 : Thu Nov 04 2010 - 20:52:23 PDT