[IBIS] BIRD128: Allow AMI_parameters_out to pass AMI_parameters_in data on calls to AMI_GetWave

From: Mirmak, Michael <michael.mirmak@intel.com>
Date: Thu Mar 10 2011 - 15:10:21 PST

(resend with complete title)

 

The enclosed BIRD number 128, Allow AMI_parameters_out to pass
AMI_parameters_in data on calls to AMI_GetWave, is submitted on behalf of
Walter Katz of Signal Integrity Software (SiSoft). It will be discussed at
an upcoming IBIS Open Forum teleconference.

 

A complete list of BIRDs is available at http://www.eda.org/ibis/birds/.

 

Michael Mirmak

Intel Corp.

Chair, IBIS Open Forum

 

 

 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Thu Mar 10 15:11:21 2011

This archive was generated by hypermail 2.1.8 : Thu Mar 10 2011 - 15:11:23 PST