RE: [IBIS] Multi Chip Module IBIS

Rajeshwari,

You can use IBIS EBD to model the multi-chip model.

Walter

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Muranyi,
Arpad
Sent: Friday, August 19, 2011 10:00 AM
To: ibis@eda.org
Subject: RE: [IBIS] Multi Chip Module IBIS

You can put the two IBIS models into on IBIS file

under two [Component] keywords.

Arpad

==================================================

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of
rajeshwari.joshi@wipro.com
Sent: Friday, August 19, 2011 4:45 AM
To: ibis@eda.org
Subject: [IBIS] Multi Chip Module IBIS

Hello experts,

I have individual ibis models available for chip A & chip B.

Using already existing ibis models form chip A & chip B is there
possibility of building multi-chip IBIS model?

If yes please explain the method of implementation.

Thanks & Regards,

Rajeshwari

Please do not print this email unless it is absolutely necessary.

The information contained in this electronic message and any attachments
to this message are intended for the exclusive use of the addressee(s) and
may contain proprietary, confidential or privileged information. If you
are not the intended recipient, you should not disseminate, distribute or
copy this e-mail. Please notify the sender immediately and destroy all
copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient
should check this email and any attachments for the presence of viruses.
The company accepts no liability for any damage caused by any virus
transmitted by this email.

www.wipro.com

-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 
-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993