[IBIS] Validation of IBIS 5.0 model with package parasitics

From: Rinsha Reghunath <Rinsha.Raghunath@synopsys.com>
Date: Thu Apr 04 2013 - 04:38:45 PDT
Hi all,

I am trying to validate an IBIS 5.0 model at 500Mbps with package parasitics (R, L, C for supply, ground and pad) and on-die RC decoupling. The issue is that the I-T waveforms are not matching when I add inductance to the ground terminal. When I remove the inductance on the ground terminal keeping the rest of the setup same, the I-T waveforms correlate. Has anyone come across this issue or any suggestions on rectifying the same?

Thanks & Regards,
Rinsha

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993
Received on Thu Apr 4 04:39:52 2013

This archive was generated by hypermail 2.1.8 : Thu Apr 04 2013 - 04:40:42 PDT