[IBIS] RE: On-die decap modeling in IBIS 5.1

From: Rinsha Reghunath <Rinsha.Raghunath@synopsys.com>
Date: Thu Jul 11 2013 - 09:16:53 PDT
Hi Arpad,


Thanks for your reply.



As I mentioned in my first mail, I have read about using "Series" model type and [Series Pin Mapping] keyword to model decoupling circuit. I also referred "Modeling the On-die De-cap of IBIS 5.0 PDN-aware Buffers by Lance Wang and Randy Wolff, IBIS Summit (Taipei) Nov. 21st, 2011" wherein it has mentioned the problem in this approach. So wanted to confirm if Series model is the option being used for the same, which is now clear from your reply.



Thanks,

Rinsha

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Muranyi, Arpad
Sent: Thursday, July 11, 2013 7:39 PM
To: ibis-users@eda.org; ibis@eda.org
Subject: [IBIS] RE: On-die decap modeling in IBIS 5.1

Rinsha,

Did you read the section on [Composite Current] in the IBIS
specification?  There is some mention in there about this
topic (around pg. 70 in the v5.1 PDF file).  It basically
boils down to use the series models between power and ground,
optionally with [Pin Mapping] for more detail.

Please ask your questions in a more specific way, because if
your questions are general, people are not going to start
writing books in emails to explain everything you might be
interested in about IBIS...

I hope this helps,

Arpad
=================================================================


From: owner-ibis@eda.org<mailto:owner-ibis@eda.org> [mailto:owner-ibis@eda.org] On Behalf Of Rinsha Reghunath
Sent: Thursday, July 11, 2013 4:25 AM
To: ibis-users@eda.org<mailto:ibis-users@eda.org>; ibis@eda.org<mailto:ibis@eda.org>
Subject: [IBIS] RE: On-die decap modeling in IBIS 5.1

Hello all,

I would like to understand about on-die decap modeling in IBIS 5.1 models and how PDN analysis is done using the same. Any help would be appreciated.

Thanks,
Rinsha

From: owner-ibis-users@eda.org<mailto:owner-ibis-users@eda.org> [mailto:owner-ibis-users@eda.org] On Behalf Of Rinsha Reghunath
Sent: Monday, July 08, 2013 2:41 PM
To: ibis-users@eda.org<mailto:ibis-users@eda.org>; ibis@eda.org<mailto:ibis@eda.org>
Subject: [IBIS-Users] On-die decap modeling in IBIS 5.1

Hi all,

How do we model RC on-die decap in IBIS 5.1 models?

I read about using "Series" model type and [Series Pin Mapping] keyword to model decoupling circuit, but would like to understand more about the same. Please guide with reference materials or explanations.

Thanks,
Rinsha

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993
Received on Thu Jul 11 09:18:50 2013

This archive was generated by hypermail 2.1.8 : Thu Jul 11 2013 - 09:19:04 PDT