Hi Chetan, Yes My question is related to VT validation of data along with Rise and Fall waveform. In brief, all data points. Do you know any tool which is open source and use for validating IBIS data point. Thanks Abhishek Goswami Phone No -07829580867/9962270999 Skype : abhishekgoswami1 From: Chetan Kumar <Chetan.Kumar@nxp.com> To: abhishek goswami <zeal_goswami@yahoo.com>; "ibis@eda.org" <ibis@eda.org>; "ibis-users@eda.org" <ibis-users@eda.org>; "si-list@freelists.org" <si-list@freelists.org> Sent: Wednesday, 15 October 2014 1:48 PM Subject: [IBIS] RE: [IBIS-Users] Re: Regarding IBIS Validation Hi Abhishek, Do you mean be viewing the waveform? If Yes, then there Hyperlynx visual ibis editor where you can view the V-t data. If your question is related to validating this Vt data then there are commercially available tools like T2B , IOMeth etc which run spice simulations to verify the accuracy of the tabulated data in IBIS file. Regards Chethan From:owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of abhishek goswami Sent: Wednesday, October 15, 2014 1:36 PM To: ibis@eda.org; ibis-users@eda.org; si-list@freelists.org Subject: [IBIS-Users] Re: Regarding IBIS Validation <sending again As did not message> Hi All, I am not very expert in IBIS modelling and have very small query. In our system, we have tool which generate IBIS file and contain information about rise and fall waveform. In current scenario, I have to change r_fixture value and need to generate IBIS file. I am able to generate IBIS file and contain all data points. I want to very all data points which is present in IBIS file. Is there any tool/mythology available to verify IBIS data points. I have run ibischk5 and did not get any error. In brief, I want to verify all points in IBIS. Thanks Abhishek Goswami Phone No -07829580867/9962270999 Skype : abhishekgoswami1 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org |or ibis-request@eda-stds.org | |IBIS reflector archives exist under: | | http://www.eda-stds.org/ibis/email_archive/ Recent | http://www.eda-stds.org/ibis/users_archive/ Recent | http://www.eda-stds.org/ibis/email/ E-mail since 1993Received on Wed Oct 15 02:12:34 2014
This archive was generated by hypermail 2.1.8 : Wed Oct 15 2014 - 02:13:13 PDT