Dear experts,
 
I just followed the document "Secrets Revealed:
Creating accurate LVDS IBIS models" by Adam Tambone in
Fairchild Semiconductor Corp to generate V-t and I-V
curves for a LVDS differential buffer. The format of
the .lis file looks like that of the single-ended
buffer, but I don't know how to generate the 100 best
points for these curves(convert the output data to
IBIS format), It seems  IC1NT9K.EXE  can not work for
this kind of data.
 
Thanks a lot!
 
bi


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.