2000 ANSI/EIA-656A IBIS Committee Participation RosterAs of 12/01/00 (updated periodically) Rev9.9 Previous participation under old95 - old99 directories Submit changes/updates to: webmaster
NOTE: This roster lists companies and organizations that have either participated in creating the IBIS spec or are creating/distributing/using IBIS models. Other than the specific statements of support under each organization's name, no support nor endorsement of the specification is implied. Companies designated by * are members of the EIA IBIS Open Forum.
* 3Com Corp
Primary: Roy Leventhal Phone: (847) 797-2152 Fax: (847) 222-2799 Address: 1800 W. Central Rd. Mt. Prospect, IL 60056-2293 Secondary:Kalwant (Kal) Dosanjh Phone: +44 1442 438399 Fax: Address: Boundary Way Marylands Park South Bldg. 1 Hemel Hempstead Hertfordshire HP2 7YU England Support: 3Com is a participant in and supporter of IBIS activities. We use IBIS models for Signal Integrity Analysis on high-speed networking products. Tag-line: With over 300 million customer connections world-wide, 3Com Corporation connects more people and organizations to information and each other in more innovative, simple and reliable ways. 3Com delivers e-Networking solutions through information access products and network systems to enterprises, small businesses, consumers, carriers and network service providers. "3Com - More connected." For further information, visit 3Com's World Wide Web site at http://www.3com.com or the press site at http://www.3com.com/pressbox. Category: IBIS user.
Primary: Karl Kachigan Phone: (707) 577-3949, Fax: (707) 577-5260 Secondary:Henry Wu Phone: (707) 577-5445, Fax: (707) 577-2995 Address: 1400 Fountaingrove Parkway Santa Rosa, CA 94503 Support: Support IBIS models in HP 85240 Picosecond Interconnect Modeling Suite for interconnect model development and analysis. Tag-line: HP EEsof is a leading supplier of high frequency analog (RF/Microwave) design and modeling tools. Category: EDA vendor
Primary: Eric Bracken Phone: (412) 261-3200, Ext. 135, Fax: (412) 471-9427 Secondary:Louis Smolenski Phone: (412) 261-3200, Ext. 166, Fax: (412) 471-9427 Address: Fours Station Square Suite 200 Pittsburgh, PA 15219-1119 Support: Tag-line: Category:
* Applied Simulation Technology, Inc
Primary: Raj Raghuram Phone: (408) 436-9070 ext101, Fax: (408) 436-9078 Secondary:Fred Balistreri Phone: (408) 436-9070 ext102, Fax: (408) 436-9078 Address: 1641 N. First Street Suite 170 San Jose, CA 95112 Support: Applied Simulation Technology tools support IBIS models. Tag-line: Applied Simulation Technology offers accurate, state of the art signal integrity, EMI / EMC and circuit simulation tools. Category: EDA vendor
Apt Software Avenues Pvt Ltd
Primary: Atul P. Agarwal Phone: +(91) (33) 353 0678 Secondary:Nirmal K. Agarwala Phone: +(91) (33) 353 1959 Address: P84A CIT Road scheme IV (M) Calcutta 700 010, India Support: Apt Software has developed the IBIS 3 Golden Parser and is also responsible for its maintenance and support. Tag-line: Apt Software provides turnkey software development services in the areas of VLSI CAD, hand-held devices and Web based Client Server applications. We also develop IBIS models by circuit simulation of Spice netlists. Category: IBIS model and IBIS related software developer.
* Avanti Corporation
Primary: Nikolai Bannov Phone: (510) 413-8634, Fax: (510) 413-8080 Secondary:Bob Daniels Phone: (510) 413-8634, Fax: (510) 413-8080 Address: 46871 Bayside Parkway Fremont, CA 94538 Support: Tag-line: Category: EDA vendor
* Brocade Communication
Primary: Robert Badal Phone: (408) 501-8647, Fax: (408) 487-8090 Secondary:Ralph B. Phone: (408) 501-8194, Fax: (408) 487-8090 Address: 1901 Guadalupe Parkway San Jose, California 95131 Support: Brocade is a participant in and supporter of IBIS activities. We use IBIS models for Signal Integrity Analysis on high-speed networking products. Tag-line: Brocade is the leading provider of Storage Area Networking infrastructure. The Brocade SilkWorm(r) family of Fibre Channel switches and software is designed to optimize data availability in the storage enterprise. Using Brocade solutions, companies can simplify the implementation of Storage Area Networks (SANs), reduce the total cost of ownership of data storage environments, and improve network and application efficiency and performance. For more information, visit the Brocade website at www.Brocade.com Category: IBIS user
* Cadence Design Systems, Inc.
Primary: Mike LaBonte Phone: (978) 262-6496, Fax: (978) 262-6600 Secondary:Ian Dodd Phone: (978) 262-6258, Fax: (978) 262-6600 Address: 270 Billerica Rd, Chelmsford, MA 01824 Support: Cadence fully supports IBIS models. The SPICE-based SPECCTRAQuest product family offers a vendor-specific, IBIS compatible signal integrity library of over 9000 components. Cadence also provides a translator program enabling the conversion of IBIS 1.1 through 3.2 files to Cadence library format. Tools for enhanced model checking and simulation testing are available. Tag-line: Cadence, the worldwide leader in electronic design automation, combines leading-edge technology and a complementary set of services to accelerate and advance the overall performance engineering of high-speed electronic systems. Category: EDA vendor
Centro Studi E Laboratori Telecomunicazioni
Primary: Flavio Maggioni Phone: +39 011 228 6996, Fax: +39 11 228 5695 Secondary:Giovanni Ghigo Phone: +39 011 228 5423, Fax: +39 11 228 5695 Address: Via G. Reiss Romoli 274 10148 Torino Italy Support: CSELT Lab offers a IBIS model extraction service using TDR techniques based on measurements done on high performance ATE equipment(Patent Pending). Tag-line: CSELT guarantees high accuracy of IBIS models, thanks to the proprietary characterization methodology based on the testing equipment Schlumberger ITS 9000IX and ad hoc developed de-embedding software. This high-performance ATE (Automatic Test Equipment) allows very fast and accurate measurements of all the parameters required by the IBIS format. More info on our web site http://switch.cselt.it/lab_test/IBIS.htm Category: Provider of IBIS models based on measurements.
* Cisco Systems,Inc
Primary: Syed Huq Phone: (408) 525-3399, Fax: 408-526-5504 Secondary:Sergio Camerlo Phone: (408) 527-1378, Fax: 408-526-5504 Address: 170 West Tasman Drive San Jose, CA 95134-1706, USA Support: Cisco is an active participant and supporter of IBIS activities. IBIS models are used for Signal Integrity Analysis on High-speed Networking products. Cisco is also the webmaster of the IBIS website. Tag-line: Cisco Systems, Inc. (NASDAQ: CSCO) is the worldwide leader in networking for the Internet. Cisco products include routers, LAN and ATM switches, dial-up access servers and network management software. These products, integrated by the Cisco IOS software, link geographically dispersed LANs, WANs and IBM networks. Cisco Systems news and product/service information are available on the World Wide Web site at http://www.cisco.com. Cisco Systems is headquartered in San Jose, California. Category: IBIS user and model developer(Cisco ASICs).
* Compaq Computer Corporation
Primary: Robert Haller Phone: (508) 467-4546, Fax: (508) 467-4493 Address: 200 Forest St. MR01-1/P5 Marlboro MA 01752 Secondary:Shafiq Rahman Phone: (281) 514-9079, Fax: (281) 518-0652 Address: 080802 20555 SH 249 Houston, TX 77070-2698 Support: Compaq will generate IBIS models for its own chip products, including the line of ALPHA AXP microprocessors, peripheral and communication chips, as needed, and support IBIS models in in-house simulation tools. Tag-line: Category:
* Cypress Semiconductor
Primary: Rajesh Manapat Phone: (408) 432-7064, Fax: (408) 943-4782 Secondary:Raymond Leong Phone: (408) 943-2134, Fax: (408) 943-2782 Address: 3901 N. First Street San Jose, CA 95134, USA Support: Cypress will generate IBIS models for the integrated circuits it designs and manufactures. Tag-line: Cypress is a leader in the development and production of high- performance CMOS and BiCMOS digital integrated circuits. Category: Model provider
* EMC Corporation
Primary: Brian Arsenault Phone: (508) 435-2075 ext 14139. Fax:(508) 435-8949 Secondary:Fawn Englemann Phone: (508) 435-2075 ext 1171. Fax:(508) 435-8809 Secondary:Terry Jernberg Phone: (508) 435-2075 ext 12247. Fax:(508) 497-8741 Address: 171 South Street Hopkinton, MA 01748 Support: Tag-line: Category:
EIA/Electronic Information Group
Primary: Cecelia Fleming Phone: (703) 907-7554. Fax: (703) 907-7501 Address: 2500 Wilson Blvd. Arlington, VA 22201 Support: Tag-line: Category:
* Fairchild Semiconductor
Primary: Christian Klein Phone: (207) 761-6242, Fax:(207) 761-6137 Secondary:Graham Connolly Phone: (207) 775-4579, Fax:(207) 761-6137 Address: 333 Western Ave. South Portland, ME 04106 Support: Tag-line: Category:
Primary: Paul Gregory Phone: (208) 323-8354 Fax: Address: 11311 Chinden Blvd Boise, ID 83714-1021 Secondary: Phone: Address: Support: Hewlett Packard is a participant in and supporter of IBIS activities. Hewlett Packard uses IBIS models for Signal Integrity Analysis on various products including computing and imaging products. Tag-line: Category: IBIS user.
* HyperLynxa division of
PADS Software Inc.
Primary: John Angulo Phone: (425) 869-2320, Fax: (425) 881-1008 Secondary:Kellee Crisafulli Phone: (425) 869-2320, Fax: (425) 881-1008 Address: 14715 N.E. 95th. St, Suite 200 Redmond, WA 98052 Support: HyperLynx supplies software for signal integrity, crosstalk, and electromagnetic-compatibility(EMC)analysis. HyperSuite EXT: An integrated Windows 95/98/NT-based software suite that includes pre-layout (LineSim) and post-layout(BoardSim) signal integrity, crosstalk and EMC simulation products. BoardSim: The post-layout analysis package that reads a routed board-layout file, which can come from any of several PCB layout packages. Options include EMC analysis, crosstalk analysis and SPICE writer. Quick Analysis uses true electrical thresholds and a unique algorithm to quickly identify crosstalk aggressors using both driver edge rates and layout information prior to simulation. Both batch and interactive simulation modes are supported. BoardSim natively supports IBIS files and ships with a set of IBIS libraries. LineSim: This pre-layout analysis package allows detailed planning prior to labor-intensive layout, using a specialized "topology" schematic editor to model complex interconnect scenarios. Options include EMC analysis, crosstalk analysis and SPICE Writer for LineSim. The simulator reads IBIS files as part of its native library support. LineSim ships with a library of IBIS models. Visual IBIS Editor: The Visual IBIS Editor is an IBIS model development tool available without charge at www.hyperlynx.com. It includes syntax validation, the Easy IBIS Wizard for model creation, a model template generator, and graphical viewer for I-V and V-T tables. Tag line: HyperLynx's signal integrity and EMC simulation tools are used by more engineers than any competing tool on the market today. Download our free demo at http://www.hyperlynx.com Category: EDA vendor
Primary: Michael Cohen Phone: (919) 543-4042 Fax:(919) 254-7778 Address: Design Tools Department D-26D/B-306/R-E122D 3039 Cornwallis Road Research Triangle Park, NC 27709 Secondary:Greg Edlund Phone: (507) 253-2952 Fax:(507) 253-4966 Address: 3605 Hwy 52 N, Dept. HDC Rochester, MN 55901 Support: IBIS datasheets for IBM's PowerPC microprocessor family are available on the web. IBM requires that users of its memory products register to receive IBIS datasheets. Tag-line: IBM is both an IBIS datasheet developer and an IBIS user. IBM joined the IBIS Open Forum as a voting member in March of 1999. Category:
* INCASES Engineering GmbH
Primary: Werner Rissiek Phone: ++49-5251-150-620, ++49-5251-150-625, Fax: ++49-5251-150-700 Secondary:Michael Schaeder Phone: ++49-5251-150-625, Fax: ++49-5251-150-700 Address: INCASES Engineering GmbH Vattmannstrasse 3 D-33100 Paderborn, Germany Support: INCASES provides the EMI and SI board screening tool EMC-ENGINEER as well as the simulation packages SI-WORKBENCH and RADIATION-WORKBENCH. INCASES supports IBIS models by providing an IBIS-to-INCASES converter that bases on the IBIS Golden Parser 2.1 (IBIS 3.2 support in development). The converter creates INCASES macromodels, corresponding reference lists, and further information for the components in a fully automatic way. The INCASES Library management tool provides specific features to import the new models generated by the converter into respective libraries. It checks for consistency, supports the defintion of user specific IDs, and allows to reference the models also for other components which show a similar behaviour as the original ones. Detailed information is available on request. Tag-line: INCASES Engineering, GmbH, Germany, founded on November 1, 1994, is a supplier of design automation software and consulting services to the electronic design automation (EDA) market, focusing on EMC and 'Design for Manufacturability'. INCASES develops, sells, and supports two major product lines: THEDA, acquired from Computervision Corporation and EMC-Workbench, acquired from Siemens Nixdorf Informationssysteme AG. Category: EDA vendor
Primary: Guy de Burgh Phone: (805) 988-8250, Fax: (805) 988-8259 Secondary:Jon Powell Phone: (805) 988-8250, Fax: (805) 988-8259 Address: 1385 Del Norte Rd. Camarillo, CA 93010 Support: Quad Design has a translation program that translates from IBIS format to Quad Design .mod format. This translator uses the Golden Parser code with enhancements to warn of malformed (yet legal) models. The translator supports user input to be able to select from the min-typ-max range of IBIS data. This program (IBIS2XTK) is available now and is distributed with XTK Crosstalk and transmission line simulation tool kit. Tag-line: Quad Design is a leading supplier of Signal Integrity and Timing tools for high speed digital designs. Category: EDA vendor
* Intel Corporation
Primary: Will Hobbs Phone: (503) 264-4369, Fax: (503) 264-1831 Secondary:Stephen Peters Phone: (503) 264-4108, Fax: (503) 264-1831 Address: 2111 N.E 25th Avenue, JF1-209 Hillsboro, OR 97124-5961 Secondary:Frank Kern Phone: (xxx) xxx-xxxx, Fax: (xxx) xxx-xxxx Address: 2800 Center Drive MS DP2-400 Du Pont, WA 98327 Support: Intel is a strong supporter of the IBIS standard, and provides IBIS models for many of its components. To access models of publicly announced and supported components, access Intel models directory on the IBIS web page: http://www.eda.org/pub/ibis/models/intel For information on models of unannounced products, contact your local Intel field sales office. Tag-line: Intel, the world's largest chip maker, is also a leading manufacturer of personal computer networking and communications products. Category: Model provider
Primary: Shinichi Maeda Phone: (603) 886-8711, Fax: (603) 881-8763 Secondary: Phone: Address: 39 Simon Street Nashuz, NH 03060, USA Support: Tag-line: KAW/USA designs, engineers and consults "Total Concept Solution" of sytem from IC packagind design to board design, fabrication based signal integrity analysis. Category: End user
* LSI Logic -- The Communications Company
Primary: Larry Barnes Phone: (719) 533-7000, Fax: (719) 533-7480 Secondary:Scott King Phone: (612) 921-8579, Fax: (612) 921-8399 Address: 4420 Arrowswest Drive Colorado Springs, CO 80907 Support: LSI Logic provides IBIS models for selected SCSI components from its Storage Standard Products division. Tag-line: Category: Model Provider
* Micron Technology, Inc
Primary: Randy Wolff Phone: (208)363-1764, Fax: (208)368-2514 Secondary:Yong Phan Phone: (208)363-2184, Fax: (208)368-2514 Address: 8000 S. Federal Way Mail Stop: 351 Boise, ID 83707-0006 Support: Micron Technology, Inc. provides IBIS v3.2 models for selected DRAM, SRAM, and Flash memory products. Tag-line: Micron Technology, Inc., and its subsidiaries manufacture and market DRAMs, very fast SRAMs, Flash, other semiconductor components, memory modules, and personal computer systems. Category: Model provider.
* Mentor Graphics(including VeriBest, etc.)
Primary: Bob Ross Phone: (503) 685-0732 Fax:(503) 685-4897 Secondary:Tom Dagostino Phone: (503) 685-1613 Fax:(503) 685-4897 Address: Mentor Graphics 8005 S.W. Boeckman Road Wilsonville, Oregon 97070 Secondary:David Wiens Phone: (303) 581-2306 Fax: (303) 581-9972 Address: 6101 Lookout Rd. Boulder, CO 80301 Support: The Interconnect Synthesis (IS) product supports IBIS Version 2.1 and most IBIS Version 3.2 features. The VeriBest PCB Signal Analyzer product uses native IBIS device models for signal simulation. IBIS Modeling Products include the ICX Standard Library, ICX Project Modeling, and ICX Custom Modeling. These products are sold to Mentor Graphics customers. Also, IBIS models are supplied to IC vendors for re-distribution to end user customers. Models are created from measurements of physical devices under a tightly controlled high frequency fixture and modeling system, or from SPICE models. These accurate models closely represent actual device behavior when used in simulation. Tag-line: The leading Interconnect Synthesis, signal integrity, and IBIS model supplier for Windows and Unix platforms Category: EDA Vendor, Model Provider
* Mitsubishi Semiconductor America,
Primary: Tam(Tom) Cao(Mitsubishi Electronics America, Inc. - Electronic Device Group) Phone: (919) 479-3479, Fax: (919) 479-3309 Address: Three Diamond Lane Durham, NC 27705 Secondary:Midori Nakamae(Mitsubishi Electric Corporation. Memory IC Div) Fax: +81 727 80 2649 Address: 4-1 Mizuhara,Itami,Hyogo 664,Japan Support: Mitsubishi provides IBISv2.1 models for selected memory product lines. Tag-line: Mitsubishi designs, engineers, and produces advanced semiconductor devices for use in computer video and communications equipment. Category: Models provider & End user.
* Molex Incorporated
Primary: Gus Panella Phone: (630) 527-4617 FAX: (630)969-1352 Address: 2222 Wellington Court Lisle, Illinois 60532 Secondary:Jim McGrath Phone: (630) 527-4037 Address: 2222 Wellington Court Lisle, Illinois 60532 Support: Molex is a participant in and supporter of IBIS activities. We plan to create IBIS models in support of the IBIS connector standard. Tag-line: Molex is both an IBIS datasheet developer and an IBIS user. Molex joined the IBIS Open Forum as a voting member in February of 2000 and one of the principal developers of the proposed IBIS Connector Specification. Category: IBIS user and model developer
Primary: Ron Werner Phone: (480) 441-0586 Fax:(480) 441-2363 Secondary: Phone: Address: 8201 E. McDowell Road Scottsdale, AZ 85252 Support: Tag-line: Category:
* National Semiconductor Corp.
Primary: Milt Schwartz Phone: (408) 721-3261, Fax:(408)721-4785 Secondary:John Goldie Phone: (408) 721-2075, Fax:(408)721-4785 Address: 2900 Semiconductor Drive, M/S A-2595 Santa Clara, CA 95052 Support: National Semiconductor provides IBISv1.1 and IBISv2.1 models from various product lines. Refer to http://www.natonal.com/models/ibis/ibis.html for the latest available models. Tag-line: National Semiconductor will provide system-on-a-chip solutions for our key data highway strategic partners, exploiting our analog expertise as a starting point for forward integration. Category: Model provider & End user
Primary: Calvin Trowell Phone: (919) 991-2962, Fax: (919) 991-7440 Address: 4008 E. Chapel Hill Nelson HWY., MS D1500B10 Durham, NC 27709 Secondary:Ross Pryor Phone 978-288-3811, Fax: Address: 600 Technology Park Drive, M/S: E6560404 Billerica, MA 01821 Secondary:Hassan Ali Phone 613-765-1410 , Fax: 613-763-7876 Address: 1 Brewer Hunt Way Kanata, ON K2K 2B5, Canada Support: Tag-line: Nortel Networks designs, develops, manufactures, markets, sells, finances, installs and services fully digital telecommunications systems. Category: IBIS user and model developer(Nortel ASICs).
North Carolina State University
Primary: Michael Steer, Paul Franzon, Alan Glaser Phone: 919-515-5191 919-515-7351 919-515-3947 FAX for all three: 919-515-5523 Address: ECE Dept. Box 7911 NC State Univ. Raleigh, NC 27695-7911 Support: Two SPICE to IBIS converters have been developed and are in the public domain. They are both available on our Web page, and at the IBIS Web page. Category:
* North East Systems Associates, Inc. (NESA)
Primary: Dr. Ed Sayre Phone: (978) 897-8787, Fax: (978) 897-5359 Secondary:Kathy Breda Phone: (978) 897-8787, Fax: (978) 897-5359 Address: 636 Great Road, Suite 6 Stow, MA 01775 USA Support: NESA is an active participant and supporter of IBIS activities. Dr. Sayre is the chairperson of the IBIS Users' Group. NESA engineers use IBIS models for signal integrity analysis on high-speed designs. Tag-line: The team at NESA specializes in design and analysis of products for high performance networking, telecommunication, computer, semiconductor and interconnect companies. NESA's engineers have the experience and knowledge required to turn difficult design challenges into cost effective, timely solutions. NESA information, and technical papers are available on the World Wide Web site at http://www.nesa.com. Category: IBIS user and model developer.
* Philips Semiconductor(including VLSI Technology)
Primary: D.C. Sessions Phone: (480) 752-6545, Fax: (480) 752-6002 Address: 8375 South River Parkway MS 250 Tempe, AZ 85284 Secondary:Todd Andersen Phone: (505) 822-7666, Fax: (505) 822-7802 Address: MS 55 9201 Pan American Fwy NE Albuquerque, NM 87113 Support: Tag-line: Category:
* Quantic EMC, Inc.
Primary: Mike Ventham Phone: +44 1761 232191, Fax: +44 1761 233549 Address: Croft House, Chilcompton Bath, Somerset, England BA3 4JA Secondary:Al Wexler Phone: (204) 942-4000, Fax: (204) 957-1158 Address: 191 Lombard Ave Winnipeg, Manitoba, R3B 0X1 Canada Support: Quantic provides an IBIS reader (based on the Golden Parser) that will read IBIS models and automatically generate data files for Phidias (our graphical VI curve device modellor) and database files that associate the component definitions with the pin models. From Phidias, both SPICE models for PCB Greenfield (our pre and post layout transmission line simulator) and models used in BoardScan, (our PC board screener for signal integrity and crosstalk problems), EmcScan, (for scanning radiated emissions near the board) and Compliance (the EMC system simulator) can be created. This is available now for Quantic customers. Tag-line: Quantic has been the leading supplier of field solvers and signal integrity tools since 1983. We also provide leading edge Electromagnetic Compatibility (EMC) tools. Category: EDA vendor
* Robinson Nugent
Primary: Alexander (Sandy) Barr Phone: (812) 941-3573 Fax: (812) 945-0805 Secondary:Aaorn Sparks Phone: (812) 949-6361 Fax: (812) 945-0805 Address: 800 East Eight Street P.O. Box 1208 New Albany, IN 47151-1208 Support: Tag-line: Category:
* Siemens AGPrimary: Gerald Bannert Phone: +49-89-722-44631 Fax : +49-89-722-27975 Address: Dept. ICN M TC 14 Hofmannstr. 51 D-81379 Munich Germany Secondary:Dr. Bernhard Unger Phone: +49-89-636-47404 Fax : +49-89-636-44595 Address: Siemens AG ATD IT PS 8 MCH Otto-Hahn-Ring 6 D-81739 Munich Germany Support: The Siemens Industrial Projects and Technical Services Group (Siemens ATD) provides services to generate IBIS models based on HSPICE and SPICE behavioral models based on IBIS. For obtaining accurate high quality models Siemens ATD has developed in-house HSPICE2IBIS and IBIS2SPICE converters. Tag-Line: Siemens ATD provides a broad spectrum of Electronic Design Services ranging from engineering, design support and consulting in the domain of ASIC, FPGA, PCB and System Design with particular emphasis on High Speed Design and EMC Engineering. Detailed information on our services are available on the Website at http://www.atd.siemens.de/it-dl/eda/emv Category: IBIS user and model developer.
* SiQualPrimary: Scott McMorrow Phone: (503) 708-4320 Fax : (503) 885-0550 Secondary:Dave Macemon Phone: (503) 885-1231 Fax : (503) 885-0550 Address: P.O. Box 3090 18735 S.W. Boones Ferry Road Tualatin, OR 97062-3090 Support: SiQual is a Consulting Company that provides the following services: - IBIS Model Translations (SPICE to IBIS) - IBIS Model Validations and Verifications - Architecture and Pre-layout SI Studies - Pre-Routing SI and Timing Reviews - Post-Routing SI and Timing validation sweeps - High Speed Board Design (Place and Route) - Stackup Studies - SI Training - IBIS Training (Creation and validation) Tag-Line: SiQual works as an integral part of your design team to get your most difficult designs analyzed quickly and accurately. Category: IBIS Model Creation (As Consulting engagements), IBIS model users.
STMicroelectronicsPrimary: Armando Conci Phone: +39 039 6036149, Fax: +39 039 6035128 Secondary: Sandro Ferreri Secondary: Antonio Girardi Phone: +39 039 6037065, Fax: +39 039 6035128 Address: Via C. Olivetti 2 20041 Agrate Brianza (Milano) Italy Support: STMicroelectronics, Memory Product Group, Flash Division guarantees high accuracy IBIS models for selected standalone standard and advanced architecture ST Flash Memory devices for ST customers usage inside board simulation. The model request submit form is available at http://www.st.com/products/support/memory/flash/model_fo.htm Tag-line: STMicroelectronics (formerly SGS-THOMSON Microelectronics) is a global independent semiconductor company, whose shares are traded on the New York Stock Exchange, on the Paris Bourse and on the Milan Stock Exchange. The Company designs, develops, manufactures and markets a broad range of semiconductor integrated circuits (ICs) and discrete devices used in a wide variety of microelectronics applications, including telecommunications systems, computer systems, consumer products,automotive products and industrial automation and control systems. Further information on ST can be found at www.st.com. Category: IBIS models developer.
* Texas Instruments, Inc.Primary: Thomas Fisher(Data Transmissions) Phone: (214) 480-3736 Fax: (214) 480-3160 Address: 12500 TI Boulevard Dallas, TX. 75243 M/S 8710 Secondary:Jean Claude Perrin EMC support (Texas Instruments France) Chair of the IEC WG6EMC task force Phone: (33) 4 93 22 23 90 Fax: (33) 4 93 22 27 40 Address: 821 Avenue Jack Kilby - BP5 06271 Villeneuve Loubet Cedex France Secondary:Stephen M. Nolan(Standard Linear and Logic) Phone: (903) 868-7410 Fax: (903) 868-5980 Address: 6412 South Sam Rayburn Freeway, M/S 835 Sherman, TX 75090 Support: Data Transmissions Group is ramping up to provide IBIS models for their new products. Tag-line: With more than 15,000 worldwide customers, TI's unique breadth of digital and mixed-signal products offer innovative solutions for today's competitive global markets. Category: Model provider
* Time Domain Analysis Systems, Inc. (TDA Systems)Primary: Dima Smolyansky Phone: (503) 246-2272 Fax: (503) 246-2282 Secondary:Steven Corey Phone: (503) 246-2272 Fax: (503) 246-2282 Address: 11140 SW Barbur Blvd. Suite 100 Portland, OR 97219 Support: TDA Systems tools allow IBIS model extraction from TDR measurement for IC package and PCB interconnects and passive structures Tag-line: TDA Systems provides tools for interconnect measurements, modeling and model verification. Our IConnect(R) software provides accurate interconnect models by linking real-time waveform acquisition from TDR instrumentation, model extraction based on the interconnect true impedance profile, and model verification using an integrated interface to a circuit simulator. We ensure customer success in interconnect modeling work by providing our interconnect measurement and modeling expertise. Category: Provider of tools for IBIS model development
* TYCO ElectronicsPrimary: email@example.com Phone: Fax: Secondary: Phone: Fax: Address: Harrisburg, PA Support: Tyco Electronics currently provides SPICE models. We are evaluating IBIS formatted models and plan to create IBIS models to support the IBIS connector standard. Tag-line: Tyco Electronics is the world's leading supplier of electrical and electronic connectors and interconnection systems. Innovative solutions for many industries including Automotive, Computer, Communications, Consumer, and Industrial. Category: IBIS user
* VIA Technologies, Inc.Primary: Weber Chuang Phone: 886-2-22185452 ext 6522 Fax: 886-2-22187527 Secondary:Daniel Wei Phone: 886-2-22185452 ext 6352 Fax: 886-2-22187527 Secondary:Tina Wu Phone: 886-2-22185452 ext 6043 Fax: 886-2-22187527 Address: 8F, No. 533, Chunchen Rd. Shintien County, Taipei. Taiwan. ROC. Support: VIA Technologies, Inc. provides IBISv1.1, IBISv2.1, IBISv3.2 compatible IBIS models to our customers for SI and timing simulations. Tag-line: VIA Technologies, Inc. is a IC maker whose products covers PC corelogic chipsets, PC peripheral chips, lan chipsets and DVD chipsets. Category: IBIS user and model developer/provider