2002 ANSI/EIA-656A IBIS Committee Participation Roster

As of 09/25/02 (updated periodically)
Rev2.4
Previous participation under old95 - old01 directories
Submit changes/updates to: webmaster
A  BC D EF G HI J K  L MN O PQ RS  T  U  V  W  X Y Z

NOTE: This roster lists companies and organizations that have either participated in creating the IBIS spec or are creating/distributing/using IBIS models.  Other than the specific statements of support under each organization's name, no support nor endorsement of the specification is implied.  Companies designated by * are members of the EIA IBIS Open Forum.
Acuson Corp., a Siemens Company
Primary:  David Lieby    
Phone:    (650) 694-5030  Fax: (650) xxx-xxxx
Secondary:     
Phone:    
Address:   Building 4
           1230 Shorebird Way
           Mountain View, CA 94043
Support:   IBIS user for SI analysis under Cadence tools.  Some in house model
           creation.
Tag-line:  Acuson makes extensive use of Signal Integrity Analysis.  The 
           creation of accurate sonograms demands very high signal to noise
           ratios.  IBIS and SPICE analysis are part of the methodology.
Category:  IBIS user


Aeroflex UTMC Microelectronic Systems

Primary:  Greg Haynes    
Phone:    (719) 594-8197  Fax: (719) xxx-xxxx
Secondary:Teresa Farris     
Phone:    (719) 594-8035  Fax: (412) xxx-xxxx
Address:  4350 Centennial Blvd.
    Colorado Springs, Colorado 80907
Support:  IBIS models for our standard parts
    are available from our web page.
Tag line: Aeroflex UTMC is a supplier of integrated circuits
          and circuit card assemblies for the aerospace, commercial,
          communication and industrial markets.
Category: Model provider (for our own ICs)

* Ansoft

Primary:  Eric Bracken    
Phone:    (412) 261-3200, Ext. 135, Fax: (412) 471-9427
Secondary:Louis Smolenski    
Phone:    (412) 261-3200, Ext. 166, Fax: (412) 471-9427
Address:  Fours Station Square
          Suite 200
          Pittsburgh, PA 15219-1119
Support:    
Tag-line: 
Category:

* Apple Computer

Primary:  John Figueroa    
Phone:    (408) 974-7730 Fax (408) 255-9067
Secondary:    
Phone:    
Address:  1 Infinite Loop MS:305-2TC
          Cupertino, CA 95014
Support:    
Tag-line: 
Category:

* Applied Simulation Technology, Inc

Primary:  Fred Balistreri    
Phone:    (408) 436-9070 ext102, Fax: (408) 436-9078
Secondary:Neven Orhanovic    
Phone:    (503) 579-0679         Fax: (XXX) XXX-XXXX
Address:  2025 Gateway Place, Suite 318
          San Jose, CA 95110
Support:  Applied Simulation Technology tools support IBIS models.  
Tag-line: Applied Simulation Technology offers accurate, state of the art
          signal integrity, EMI / EMC and circuit simulation tools.
Category: EDA vendor

Apt Software Avenues Pvt Ltd

Primary:  Atul P. Agarwal 
Phone:    +(91) (33) 353 0678
Secondary:Nirmal K. Agarwala
Phone:    +(91) (33) 353 1959
Address:  P84A CIT Road scheme IV (M) Calcutta 700 010, India
Support:  Apt Software has developed the IBIS 3 Golden Parser and is also 
          responsible for its maintenance and support.
Tag-line: Apt Software provides turnkey software development services in 
          the areas of VLSI CAD, hand-held devices and Web based Client Server 
          applications. We also develop IBIS models by circuit simulation of
          Spice netlists.
Category: IBIS model and IBIS related software developer.

Brocade Communications System, Inc

Primary:  Robert Badal    
Phone:    (408) 501-8647, Fax: (408) 487-8090
Secondary:Ralph B.    
Phone:    (408) 501-8194, Fax: (408) 487-8090
Address:  1745 Technology Drive
          San Jose, CA 95110
Support:  Brocade is a participant in and supporter of IBIS activities. We use
          IBIS models for Signal Integrity Analysis on high-speed networking
          products.  
Tag-line: Brocade is the leading provider of Storage Area Networking
          infrastructure. The Brocade SilkWorm(r) family of Fibre Channel
          switches and software is designed to optimize data availability in 
          the storage enterprise. Using Brocade solutions, companies can
          simplify the implementation of Storage Area Networks (SANs), reduce
          the total cost of ownership of data storage environments, and improve
          network and application efficiency and performance. For more
          information, visit the Brocade website at www.Brocade.com  
Category: IBIS user

Cadence Design Systems, Inc.

Primary:  Lynne Green 
Phone:    (425) 788-0412  FAX: (425) 788-4289 
Address:  320 120th Ave NE, Suite B-103
          Bellevue, WA 98005-3016
Secondary:Unavailable
Phone:    Unavailable
Address:  Unavailable
Support:  Cadence has been a member of the IBIS Open Forum since the
          very beginning. SPECCTRAQuest, the leading Signal Integrity analysis
          software for PCBs with high speed signals, supports IBIS models.  The
          SPECCTRAQuest family of products includes Model Integrity, an easy to
          use environment for creation, manipulation and validation of IBIS
          models. Model Integrity is integrated with SPECCTRAQuest simulation and
          analysis environment. 
Tag-line: Cadence, the worldwide leader in electronic design automation,
          combines leading-edge technology and a complementary set of services to
          help  accelerate development of advanced PCBs with high speed content
          while improving the overall performance of high-speed electronic
          systems.
Category: EDA vendor

Centro Studi E Laboratori Telecomunicazion (CSELT)

Primary:  Flavio Maggioni
Phone:    +39 011 228 6996, Fax: +39 11 228 5695
Secondary:Giovanni Ghigo
Phone:    +39 011 228 5423, Fax: +39 11 228 5695 
Address:  Via G. Reiss Romoli 274
          10148 Torino
          Italy
Support:  CSELT Lab offers a IBIS model extraction service using TDR 
          techniques based on measurements done on high performance ATE
          equipment(Patent Pending).
Tag-line: CSELT guarantees high accuracy of IBIS models, thanks to the
          proprietary characterization methodology based on the testing 
          equipment Schlumberger ITS 9000IX and ad hoc developed de-embedding
          software. This high-performance ATE (Automatic Test Equipment) 
          allows very fast and accurate measurements of all the parameters
          required by the IBIS format. More info on our web site 
          http://switch.cselt.it/lab_test/IBIS.htm
Category: Provider of IBIS models based on measurements.

* Cisco Systems,Inc

Primary:  Syed Huq 
Phone:    (408) 525-3399, Fax: 408-526-5504
Secondary:Sergio Camerlo 
Phone:    (408) 527-1378, Fax: 408-526-5504
Address:  170 West Tasman Drive
          San Jose, CA 95134-1706, USA
Support:  Cisco is an active participant and supporter of IBIS activities.
          IBIS models are used for Signal Integrity Analysis on
          High-speed Networking products. Cisco is also the webmaster of the
          IBIS website.
Tag-line: Cisco Systems, Inc. (NASDAQ: CSCO) is the worldwide leader in
          networking for the Internet. Cisco products include routers, LAN and
          ATM switches, dial-up access servers and network management software.
          These products, integrated by the Cisco IOS software, link
          geographically dispersed LANs, WANs and IBM networks. Cisco Systems
          news and product/service information are available on the World Wide
          Web site at http://www.cisco.com. Cisco Systems is headquartered in
          San Jose, California.
Category: IBIS user and model developer(Cisco ASICs).

* Cypress Semiconductor

Primary:  Rajesh Manapat    
Phone:    (408) 432-7064, Fax: (408) 943-4782
Secondary:Raymond Leong    
Phone:    (408) 943-2134, Fax: (408) 943-2782
Address:  3901 N. First Street 
          San Jose, CA 95134, USA
Support:  Cypress will generate IBIS models for the integrated circuits
          it designs and manufactures.
Tag-line: Cypress is a leader in the development and production of high-
          performance CMOS and BiCMOS digital integrated circuits.
Category: Model provider

EMC Corporation

Primary:  Brian Arsenault 
Phone:    (508) 249-4139  Fax:(508) 435-8949
Secondary:Terry Jernberg 
Phone:    (508) 249-4860  Fax:(508) 497-8741
Address:  171 South Street
          Hopkinton, MA 01748
Support:  
Tag-line: 'Where information lives!'
Category: IBIS User

EIA/Electronic Information Group

Primary:  Chris Dehnam 
Phone:    (703) 907-7567. Fax: (703) 907-7501
Address:  2500 Wilson Blvd.
          Arlington, VA 22201
Support:
Tag-line:
Category:

 Fairchild Semiconductor

Primary:  Adam Tambone  
Phone:    (207) 761-6414, Fax:(207) 761-6137
Secondary:Graham Connolly  
Phone:    (207) 775-4579, Fax:(207) 761-6137
Address:  82 Running Hill Rd., MS 35-2H
          South Portland, ME  04106
Support:  
Tag-line: 
Category:

Hewlett-Packard Company

(Includes the former Compaq Computer Corporation)
Primary:  Dick Doucette  
Phone:    (508) 467-4545, Fax: (508) 467-4493
Address:  200 Forest St. MR01-1/P5
          Marlboro MA 01752
Secondary:Shafiq Rahman  
Phone:    (281) 514-9079, Fax: (281) 518-0652
Address:  080802
          20555 SH 249
          Houston, TX 77070-2698
Support:  Compaq will generate IBIS models for its own chip products, 
          including the line of ALPHA AXP microprocessors, peripheral and          
          communication chips, as needed, and support IBIS models in            
          in-house simulation tools.
Tag-line: 
Category:

* Huawei Technologies Co.,Ltd.

Primary:  Jiang Xiang Zhong
Phone:    +86-755-6540549, Fax: +86-755-6540568
Secondary:Li Jin Jun
Phone:    +86-755-26540578,Fax: +86-755-26540568
Address:  Kefa Road
          Science-Based Industrial Park
          Nanshan District, Shenzhen 518057
          P.R.China
Support:  We use IBIS models for Signal Integrity Analysis on high-speed 
          telecom products.  
Tag-line: Huawei Technologies is a company that specializes in research 
          and development (R&D) of telecom products, their production and
          marketing. It provides customised total solutions for telecom 
          carriers in fixed networks, mobile and data communication and optical
          transmission networks. For more information, visit the Huawei website
          at www.huawei.com Category: IBIS user and ASIC modeling

* IBM

Primary:  Pravin Patel
Phone:    (919) 543-3837   Fax:(919) 254-7778
Address:  3039 Cornwallis Road
          RTP, NC 27709
Secondary:Greg Edlund
Phone:    (507) 253-2952   Fax:(507) 253-4966
Address:  3605 Hwy 52 N, Dept. HDC 
          Rochester, MN 55901
Support:  IBM provides its ASIC customers with high-quality IBIS model data that are
          extracted directly from the circuit model.  IBM IBIS users will benefit
          from accurate receiver thresholds and C_comp values.  Our process for
          extracting IBIS model data involves automatic correlation between
          behavioral and transistor-level simulations during which we review goodness
          of fit using established figures of merit.  IBIS datasheets for IBM's
          PowerPC microprocessors are available on the web.

Tag-line: IBM is both an IBIS datasheet developer and an IBIS user.  IBM
          joined the IBIS Open Forum as a voting member in March of 1999.
Category:

* Innoveda, Inc

(now part of Mentor Graphics)
Primary:  Guy de Burgh  
Phone:    (805) 988-8250, Fax: (805) 988-8259
Secondary:John Angulo  
Phone:    (425) 869-2320, Fax: (425) 881-1008
Address:  1369 Del Norte Rd.
          Camarillo, CA 93010
Support:  Innoveda supplies IBIS-compatible software for signal integrity,
          crosstalk, and electromagnetic-compatibility (EMC) analysis.

          The XTK crosstalk and transmission line simulation toolkit has a
          translation program that supports IBIS.  This translator uses the
          Golden Parser code with enhancements to warn of malformed (yet legal)
          models. The translator supports user input to be able to select from
          the min-typ-max range of IBIS data, and conversion to the Quad model
          format.

          The Hyperlynx line of analysis tools also supports IBIS:

          HyperSuite EXT: An integrated Windows 98/2K/NT-based software suite
          that includes pre-layout (LineSim) and post-layout(BoardSim) signal
          integrity, crosstalk and EMC simulation products.  All products support
          IBIS natively and ship with a set of IBIS libraries.

          BoardSim: A post-layout analysis package that reads a routed 
          board-layout file from any of several PCB layout packages. Options
          include EMC analysis, crosstalk analysis, SPICE writer and EBD writer.
          Quick Analysis uses true electrical thresholds and a unique algorithm
          to quickly identify crosstalk aggressors using both driver edge rates
          and layout information prior to simulation. Both batch and interactive
          simulation modes are supported.

          LineSim: This pre-layout analysis package allows detailed planning
          prior to labor-intensive layout, using a specialized "topology"
          schematic editor.  Options include EMC analysis, crosstalk analysis 
          and SPICE Writer for LineSim.

          Visual IBIS Editor: The Visual IBIS Editor is an IBIS model development
          tool available without charge at www.hyperlynx.com. It includes syntax
          validation, the Easy IBIS Wizard for model creation, a model template
          generator, and graphical viewer for I-V and V-T tables.

Tag-line: The leading supplier of Signal Integrity and Timing 
          tools for high speed digital designs. 

Category: EDA vendor

* Intel Corporation

Primary:  Stephen Peters      
Phone:    (503) 264-4108, Fax: (503) 264-1831
Address:  2111 N.E 25th Avenue, 
       M/S JF4-215
     Hillsboro, OR 97124-5961
Secondary:Will Hobbs      
Phone:    (503) 264-4369, Fax: (503) 712-1397
Address:  2111 N.E 25th Avenue, 
          M/S JF5-254
    Hillsboro, OR 97124-5961
Secondary:Arpad Muranyi      
Phone:    (916) 356-2558, Fax: (916) 377-1046
Address:  1900 Prairie City Rd.
       M/S FM6-45
          Folsom, CA 95630

Support:  Intel is a strong supporter of the IBIS standard, and provides
          IBIS models for many of its components. To access models of 
          publicly announced and supported components, click on the models
          link on the IBIS web page then search for Intel.          

          For information on models of unannounced products, contact your
          local Intel field sales office.

Tag-line: Intel, the world's largest chip maker, is also a leading 
          manufacturer of personal computer networking and communications
          products.
Category: Model provider

KAW/USA

Primary:  Shinichi Maeda
Phone:    (603) 886-8711, Fax: (603) 881-8763
Secondary:
Phone:
Address:  39 Simon Street
          Nashuz, NH 03060, USA
Support:
Tag-line: KAW/USA designs, engineers and consults "Total Concept
          Solution" of sytem from IC packagind design to board design,
          fabrication based signal integrity analysis.
Category: End user


Leventhal Design & Communications

 
Primary:  Roy Leventhal 
Phone:    (847)590-9398   FAX: Call before sending (847)590-9398
Address:  1924 N. Burke Dr.
          Arlington Heights, IL 60004
Support:  Generate, validate, verify and manage IBIS models and libraries. 
          Design net topologies and terminations for Signal Integrity (SI).
          Develop design constraints for place and route and flow them into CAD. 
          Perform pre and post route SI simulation sweeps and verify timing.
          Simulate and remedy SI, EMI regulatory and power integrity issues.
          Provide reliability and yield (quality) analysis for SI and EMI issues.
          Lead design process improvements and their ISO 9000 documentation.
          Deliver training in IBIS, SPICE, Scattering Parameters, Signal 
          Integrity, and EMI.
Tag-Line: Leventhal Design & Communications has an unusually broad and deep 
          understanding of high-speed digital electronics design.  We have extensive 
          experience and training in IBIS, semiconductor modeling, signal integrity, 
          EMI, process variation, and the application of simulation tools to design 
          development. 
          Our goal is to help you meet your most challenging project schedules. 
          Toward this end, we work closely and effectively with your design staff 
          and, if needed, can call on experts in related technical fields.
Category: IBIS user and model developer (consulting or contracting)

* LSI Logic

Primary:  Frank Gasparik
Phone:    (719) 533-7000, Fax: (719) 533-7480
Secondary:
Phone:
Address:  4420 Arrowswest Drive
          Colorado Springs, CO 80907
Support:  LSI Logic provides IBIS models for selected SCSI components from 
          its Storage Standard Products division.
Tag-line: The Communications Company
Category: Model Provider

Matsushita Electric Industrial Co, Ltd

(National/Panasonic)
Primary:  Atsuji Ito
Phone:    +81-6-6905-4827,    Fax: +81-6-6905-4106
Secondary:
Phone:     
Address:  2-7 Matsuba-cho, Kadoma City, Osaka 571-8502
          Japan 
Support:  
Tag-line: 
Category: End user.

Maxim Integrated Products

Primary:  Cathy Xu
Phone:    (408)530-6508    Fax: (408)735-9653
Secondary: Unavailable
Phone:     Unavailable
Address:  120 San Gabriel Drive, MS 140
          Sunnyvale, CA 94086
Support:  Maxim provides IBIS(v2.1) models for its own products
Tag-line:
Category: Model Provider

* Mentor Graphics

Primary:  Bob Ross  
Phone:    (503) 685-0732  Fax:(503) 685-4897
Address:  Mentor Graphics
          8005 S.W. Boeckman Road
          Wilsonville, Oregon 97070 
Secondary:Ian Dodd    
Phone:    (720) 494-1197  Fax: (720) 494-0457
Address:  1811 Pike Rd, Bldg #2, Suite F
          Longmont, Colorado 80501

Support:  The Mentor Graphics provides EDA simulation and analysis
          products that use native IBIS models including most features
          of Version 3.2  

Tag-line: The leading Interconnect Synthesis, signal integrity, and IBIS 
          model supplier for Windows and Unix platforms

Category: EDA Vendor, Model Provider

* Micron Technology, Inc

Primary:  Randy Wolff
Phone:    (208)363-1764, Fax: (208)368-3475
Secondary:Bob Cox
Phone:    (208)363-1767, Fax: (208)368-3475 
Address:  8000 S. Federal Way
          Mail Stop: 711
          Boise, ID 83707-0006
Support:  Micron Technology, Inc. provides IBIS v3.2 models for 
          selected DRAM, SRAM, and Flash memory products. 
Tag-line: Micron Technology, Inc., and its subsidiaries manufacture
          and market DRAMs, very fast SRAMs, Flash, other semiconductor
          components, memory modules, and personal computer systems.
Category: Model provider.

* Mitsubishi Electric & Electronics USA Inc.

Primary:  Tam(Tom) Cao
Phone:    (919) 767-7827, Fax: (919) 767-6100
Address:  2635 Meridian Parkway
          Durham, NC 27713
          
Secondary:Tadato Yamagata(Mitsubishi Electric Corp.)
Fax:      +81-727-80-2649
Address:   4-1 Mizuhara,Itami,Hyogo 664,Japan

Support:  Mitsubishi provides IBISv2.1 models for selected
          memory product lines.
Tag-line: Mitsubishi designs, engineers, and produces advanced semiconductor
          devices for use in computer video and communications equipment.
Category: Models provider & End user.

* Molex Incorporated

Primary:  Gus Panella
Phone:    (630) 527-4617 FAX: (630)969-1352
Address:  2222 Wellington Court
          Lisle, Illinois 60532
Secondary:Jim McGrath   
Phone:    (630) 527-4037
Address:  2222 Wellington Court
          Lisle, Illinois 60532
Support:  Molex is a participant in and supporter of IBIS activities. We plan
          to create IBIS models in support of the IBIS connector standard.
Tag-line: Molex is both an IBIS datasheet developer and an IBIS user.
          Molex joined the IBIS Open Forum as a voting member in February 
          of 2000 and one of the principal developers of the proposed IBIS 
          Connector Specification.
Category: IBIS user and model developer

* Motorola, Inc.

Primary:  Rick Kingen
Phone:    (256)922-4030   Fax:(256)922-4097
Secondary:
Phone:
Address:  658 Discovery Dr.
          Huntsville, Al 35806      
Support:  Motorola creates IBIS v2.1 models for various products.
Tag-line: 
Category: Model provider.

National Semiconductor Corp.

Primary:  Milt Schwartz  
Phone:    (408) 721-3261, Fax:(408)721-4785 
Secondary:John Goldie  
Phone:    (408) 721-2075, Fax:(408)721-4785 
Address:  2900 Semiconductor Drive, M/S E-195
          Santa Clara, CA 95052
Support:  National Semiconductor provides IBISv2.1 and IBISv3.2 models
          from various product lines.  
         Refer to http://www.natonal.com/models/ibis/ibis.html for the
          latest available models.
Tag-line: National Semiconductor will provide system-on-a-chip
           solutions for our key data highway strategic partners, exploiting
               our analog expertise as a starting point for forward integration.
Category: Model provider & End user

* NEC Corporation

 
Primary   Itsuki Yamada
Phone:    +81 44-435-1513, Fax: +81 44-435-1888 
Address:  1753, Shimonumabe, Nakahara, Kawasaki, Kanagawa 211-8666,
          Japan
Secondary:Toshiyuki Saito
Phone:    +81 44-435-1513, Fax: +81 44-435-1888
Address:  1753, Shimonumabe, Nakahara, Kawasaki, Kanagawa 211-8666,
          Japan
Support:  NEC attachs importance to Signal Integrity analysis,
          and provides IBISv2.1 models of System LSI and ASIC,
          if it is necessary.
Tag-line:
Category: Model provider & End user

North Carolina State University

Primary:  Michael Steer, Paul Franzon     
Phone:    919-515-5191   919-515-7351
          FAX for all three: 919-515-2285
Address:  ECE Dept. Box 7911
          NC State Univ.
          Raleigh, NC  27695-7911
Support:  Two SPICE to IBIS converters have been developed and are in
          the public domain. They are both available on our Web page,
          and at the IBIS Web page.
Category:

* North East Systems Associates, Inc. (NESA)

Primary:  Dr. Ed Sayre   
Phone:    (978) 392-8787, Fax: (978) 392-8686           
Secondary:Kathy Breda 
Phone:    978) 392-8787, Fax: (978) 392-8686   
Address:  5 LAN Drive
          Westford, MA 01886 
          USA
Support:  NESA is an active participant and supporter of IBIS activities.
          Dr. Sayre is the chairperson of the IBIS Users' Group.
          NESA engineers use IBIS models for signal integrity analysis on
          high-speed designs.
Tag-line: The team at NESA specializes in design and analysis of products for
          high performance networking, telecommunication, computer,
          semiconductor and interconnect companies.  NESA's engineers have the
          experience and knowledge required to turn difficult design challenges
          into cost effective, timely solutions.  NESA information, and
          technical papers are available on the World Wide Web site at
          http://www.nesa.com. 
Category: IBIS user.

Philips Semiconductors

Primary:  D.C. Sessions  
Phone:    (480) 752-6545, Fax: (480) 752-6002 
Address:  8375 South River Parkway
          MS 250
          Tempe, AZ 85284          
Secondary:Rob Mataheroe
Phone:    (505) 822-7666, Fax: (505) 822-7802   
Address:  MS 55
          9201 Pan American Fwy NE
          Albuquerque, NM 87113
Support:  
Tag-line: 
Category: Model provider.

Quantic EMC, Inc.

Primary:  Mike Ventham     
Phone:    +44 1761 232191, Fax: +44 1761 233549
Address:  Croft House, Chilcompton
          Bath, Somerset, England BA3 4JA
Secondary:Al Wexler     
Phone:    (204) 942-4000, Fax: (204) 957-1158
Address:  191 Lombard Ave
          Winnipeg, Manitoba, R3B 0X1
          Canada
Support:  Quantic provides an IBIS interface (based on the Golden Parser) that
          will read IBIS models and automatically load the device models and
          components into the database for use by the Compliance and Omega 
          PLUS SI/EMC analysis tools. SPICE models are also created for use 
          PCB Greenfield (our pre and post layout transmission line simulator). 
          
Tag-line: Quantic has been the leading supplier of field solvers and
          signal integrity tools since 1983. We also provide leading edge
          Electromagnetic Compatibility (EMC) tools.
Category: EDA vendor

Robinson Nugent

Primary: Alexander (Sandy) Barr
Phone:   (812) 941-3573     Fax: (812) 945-0805
Secondary:Aaorn Sparks
Phone:   (812) 949-6361     Fax: (812) 945-0805
Address: 800 East Eight Street
         P.O. Box 1208
         New Albany, IN 47151-1208
Support:
Tag-line:
Category:

Siemens AG

Primary:  Eckhard Lenski    
Phone:        +49-89-722-27776   Fax : +49-89-722-44692
Address:  Siemens AG
          Dept: ICN WN OP TDC TC 3
          Hofmannstr.51
          D-81379 Munich
          Germany
Secondary:Dr. Bernhard Unger     
Phone:          +49-89-636-47404   Fax : +49-89-636-44595
Address:  Siemens AG
          Dept: I&S IT PS 8 MCH
    Otto-Hahn-Ring 6
        D-81739 Munich
          Germany
Support:  Siemens ICN(Information & Communication Networks) provides the 
          service of creation, validation, verification and improvements
          of IBIS-models, which are used for high frequency Signal Integrity
          and EMI-Analysis and Design Rule Check within Siemens ICM(Information
          & Communication Mobiles) and ICN. Sources for IBIS-Models are HSPICE
          Web and Datasheets. IBIS-Modeling and check is performed with
          in-house developed tools( ibischeck, s2ib, dogen) based on own
          practical application and component experiences.
          Siemens I&S(Industrial Solution & Services) provides services for
          internal and external use to generate IBIS models based on HSPICE
          and to generate SPICE behavioral models based on IBIS. For obtaining
          accurate high quality models Siemens I&S has developed in-house
          HSPICE2IBIS and IBIS2SPICE converters.
Tag-Line: Siemens I&S provides a broad spectrum of Electronic Design
          Services ranging  from engineering, design support and consulting
          in the domain of ASIC, FPGA, PCB and System Design with particular
          emphasis on High Speed Design and EMC Engineering.
          Detailed information on our services are available on the Website 
          at http://www.eda-services.com
Category: IBIS user and model developer.

* Sigrity

           
Primary:  Raj Raghuram 
Phone:    (408) 260-9344, ext. 116, Fax: (408) 260-9342
Secondary:Raymond Chen
Phone:    (408) 260-9344, ext. 102, Fax: (408) 260-9342
Address:  4675 Stevens Creek Blvd. , Ste 130
          Santa Clara, CA-95051
Support:  Sigrity tools support IBIS models
Tag-line: Sigrity provides fast, accurate tools for power and signal integrity
          analysis of packages and printed circuit boards
Category: EDA vendor

* Signal Integrity Software, Inc.

 
Primary:  Robert Haller         
Phone:    (978) 461-0449  x15    Fax: (978) xxx-xxxx
Secondary:Barry Katz
Phone:    (978) 461-0449  x19    Fax: (978) 461-5092
Address:  6 Clock Tower Place, Suite 250
          Maynard, MA 01754
Support:  Signal Integrity Software, Inc. (SiSoft) is an active participant and
          supporter of IBIS activities. SiSoft develops, validates, and supports
          IBIS models 1.1->3.2 in its consulting services and SiAuditor
          Methodology.
Tag-line: Signal Integrity Software solves high-speed design challenges.  
          Since 1995, SiSoft solutions have included the industry's most
          rigorous methodology, expert consultants averaging over 15 years
          experience, and the patented SiAuditor(TM) toolkit.  SiSoft is the 
          only company that addresses signal integrity from Core-to-Core(TM),
          helping its customers boost the performance and reliability of 
          their designs while dramatically improving their time-to-market.  
          For more information, please visit us at www.sisoft.com.
Category: IBIS user and model developer

* SiQual

Primary:  Rob Hinz     
Phone:     503-885-1231   Fax : (503) 885-0550
Secondary:Dave Macemon     
Phone:    (503) 885-1231   Fax : (503) 885-0550
Address:  P.O. Box 3090
          18735 S.W. Boones Ferry Road  
          Tualatin, OR 97062-3090          
Support:  SiQual is a Consulting Company that provides the following services:
          - IBIS Model Translations (SPICE to IBIS)
          - IBIS Model Validations and Verifications
          - Architecture and Pre-layout SI Studies
          - Pre-Routing SI and Timing Reviews
          - Post-Routing SI and Timing validation sweeps
          - High Speed Board Design (Place and Route)
          - Stackup Studies
          - SI Training
          - IBIS Training (Creation and validation)
Tag-Line: SiQual works as an integral part of your design team to get your most
          difficult designs analyzed quickly and accurately.
Category: IBIS Model Creation (As Consulting engagements), IBIS model users.

STMicroelectronics

     
Primary:   Armando Conci 
Phone:     +39 039 6036149, Fax: +39 039 6035128
Secondary: Sandro Ferreri
Phone:     +39 0957404763, Fax: +39 0957404034
Address:   Stradale Primosole 50
           95121 Catania Italy 
Secondary: Antonio Girardi 
Phone:     +39 039 6037065, Fax: +39 039 6035128 
Address:   Via C. Olivetti 2
           20041 Agrate Brianza (Milano)
           Italy
Support:  STMicroelectronics, Memory Product Group, Flash Division       
          guarantees high accuracy IBIS models for selected
          standalone standard and advanced architecture ST Flash Memory 
          devices for ST customers usage inside board simulation.
          The model request submit form is available at                  
          http://www.st.com/products/support/memory/flash/model_fo.htm  

Tag-line: STMicroelectronics (formerly SGS-THOMSON Microelectronics) is  
          a global independent semiconductor company, whose shares are   
          traded on the New York Stock Exchange, on the Paris Bourse and 
          on the Milan Stock Exchange. The Company designs, develops,    
          manufactures and markets a broad range of semiconductor        
          integrated circuits (ICs) and discrete devices used in a wide  
          variety of microelectronics applications, including            
          telecommunications systems, computer systems, consumer         
          products,automotive products and industrial automation and     
          control systems. Further information on ST can be found at     
          www.st.com.          

Category: IBIS models developer.

 Synopsys

(including the former Avanti Corporation)
Primary:  Hailong Wang    
Phone:    +86-21-62837026-228, Fax: +86-21-62820249
Secondary:Chenxin Cai    
Phone:    +86-21-62837026-228, Fax: +86-21-62820249
Address:  16/F, Sun Tong Infoport Plaza,
          No. 55 West Huai Road,
          Shanghai, P. R. China 200030
Support:    
Tag-line: 
Category: EDA vendor

Teraspeed Consulting Group LLC

Primary:  Scott McMorrow  
Phone:    503-239-5536   Fax : (503) 239-4400
Address:  2926 SE Yamhill St
          Portland, OR 97214
Secondary: Tom Dagostino
Phone:
Address:    
Support:  Teraspeed is a Consulting Company that provides the following
          services:
          - Measurement based IBIS modeling
          - IBIS Model Translations (SPICE to IBIS)
          - IBIS Model Validations and Verifications
          - IBIS Connector Models
          - System SI
          - Differential Backplane Design
          - Evaluation Systems
          - RF Design
          - SI Training
          - IBIS Training (Creation and validation)
Tag-Line: At Teraspeed, we're in business to provide *superior value* 
          with *extreme performance* in Signal Integrity Engineering.
Category: IBIS Model Creation (As Consulting engagements), IBIS model users.

* Texas Instruments, Inc.

Primary:  Thomas Fisher(Data 
Transmissions)
Phone:    (214) 480-3736   Fax: (214) 480-3160
Address:  12500 TI Boulevard
          Dallas, TX. 75243
          M/S 8710
Secondary:Jean Claude Perrin EMC 
support (Texas Instruments France)                     
          Chair of the IEC WG6EMC task force     
Phone:    (33) 4 93 22 23 90  Fax: (33) 4 93 22 27 40     
Address:  821 Avenue Jack Kilby - BP5   
          06271 Villeneuve Loubet Cedex 
          France
Secondary:Stephen M. Nolan(Standard 
Linear and Logic)                     
Phone:    (903) 868-7410  Fax: (903) 868-5980     
Address:  6412 South Sam Rayburn Freeway, M/S 835   
          Sherman, TX 75090 
Support:  Data Transmissions Group is ramping up to provide IBIS
          models for their new products.
Tag-line: With more than 15,000 worldwide customers, TI's unique breadth
          of digital and mixed-signal products offer innovative solutions
          for today's competitive global markets. 
Category: Model provider

* Time Domain Analysis Systems, Inc. (TDA Systems)

Primary:  Dima Smolyansky
Phone:    (503) 246-2272 Fax: (503) 246-2282
Secondary:Steven Corey
Phone:    (503) 246-2272 Fax: (503) 246-2282
Address:  11140 SW Barbur Blvd.
          Suite 100
          Portland, OR 97219
Support:  TDA Systems tools allow IBIS model extraction from TDR measurement
          for IC package and PCB interconnects and passive structures
Tag-line: TDA Systems provides tools for interconnect measurements, modeling 
          and model verification. Our IConnect(R) software provides accurate
          interconnect models by linking real-time waveform acquisition from
          TDR instrumentation, model extraction based on the interconnect true
          impedance profile, and model verification using an integrated
          interface to a circuit simulator. We ensure customer success in
          interconnect modeling work by providing our interconnect
          measurement and modeling expertise.
Category: Provider of tools for IBIS model development

 Tyco Electronics

Primary:  modeling@amp.com
Phone:                   Fax: 
Secondary:
Phone:                   Fax: 
Address:  Harrisburg, PA
          
Support:  Tyco Electronics currently provides SPICE models. We are evaluating
          IBIS formatted models and plan to create IBIS models to support the
          IBIS connector standard.
Tag-line: Tyco Electronics is the world's leading supplier of electrical and
          electronic connectors and interconnection systems. Innovative
          solutions for many industries including Automotive, Computer, 
          Communications, Consumer, and Industrial.
Category: IBIS user

VIA Technologies, Inc.

Primary:  Weber Chuang    
Phone:    886-2-22185452 ext 6522  Fax: 886-2-22187527
Secondary:Daniel Wei    
Phone:    886-2-22185452 ext 6352  Fax: 886-2-22187527
Secondary:Tina Wu    
Phone:    886-2-22185452 ext 6043  Fax: 886-2-22187527
Address:  8F, No. 533, Chunchen Rd. 
          Shintien County, Taipei.
          Taiwan.  ROC.
Support:  VIA Technologies, Inc.  provides IBISv1.1, IBISv2.1, IBISv3.2
          compatible IBIS models to our customers for SI and timing simulations.
Tag-line: VIA Technologies, Inc. is a IC maker whose products covers PC corelogic 
          chipsets, PC peripheral chips,  lan chipsets and DVD chipsets.   
Category: IBIS user and model developer/provider


West Park Labs , a Sole Proprietorship

Primary:   David Lieby 
Phone:     (831)332-4303
Address:   13445 West Park Avenue
           PO Box 956
           Boulder Creek, CA 95006
Support:   Signal Integrity analyst using IBIS. 
Tag-line:  West Park Labs - Electronics Engineering Design Consultant providing 
           design and analysis support.
Category:  IBIS consultant

Zuken

Primary:  Michael Schaeder
Phone:    +49-5251-150670,  Fax: ++49-5251-150-700
Address:  Zuken GmbH
          EMC Technology Center
          Vattmannstrasse 3
          D-33100 Paderborn, Germany
Secondary:Ralf Bruening
Phone:    +49-5251-150670,  Fax: ++49-5251-150-700
Address:  Zuken GmbH
          EMC Technology Center
          Vattmannstrasse 3
          D-33100 Paderborn, Germany

Support:  Zuken supports IBIS throughout its PCB and MCM design tool
          suite, including CR5000, Hot-Stage, Visula and CADSTAR.
          A single simulation library, including push-button IBIS
          model import, is used throughout the tool suite.
          Zuken has its own solution for signal integrity and EMC,
          including time and frequency domain simulation, placement
          and routing. All of this software can use IBIS as its source
          of simulation models.

Tag-line: Zuken is one of the world's leading suppliers of PCB, MCM
          and Advanced Packaging EDA solutions.
          Its global research and development team has bases in Japan,
          the U.K. and Germany, dedicated to supplying the most advanced
          design systems for high-speed, high-density circuits.
          Zuken merged with INCASES GMBH of Paderborn, Germany in 2000,
          embedding advanced IBIS-compatible simulation and
          correct-by-construction capability throughout
          its design suite.
Category: EDA vendor