RE: ibischk3 and Open Drain


Subject: RE: ibischk3 and Open Drain
From: Mirmak, Michael (michael.mirmak@intel.com)
Date: Mon Sep 24 2001 - 10:26:42 PDT


Syed,

This was covered in Bug 53 (an amendment to Bug 34). It will most likely
get fixed in the next IBISCHK3 release; Bob Ross can confirm when this will
be available.

- Michael Mirmak, Intel Corp.

-----Original Message-----
From: Syed Huq [mailto:shuq@cisco.com]
Sent: Monday, September 24, 2001 9:38 AM
To: ibis-users@eda.org
Subject: ibischk3 and Open Drain

For ibischk3 ver 3.2.6, it looks for the Pullup table for a "I/O_open_drain"
buffer. Why is that ?

WARNING - [Model] GTL has no description of the buffer's high state
         DC drive characteristics (no [Pullup] table). This warning
         can be silenced by changing the Model_type or by adding a
         [Pullup] table.

-Syed



This archive was generated by hypermail 2b28 : Mon Sep 24 2001 - 10:45:42 PDT