Subject: Re: IBIS Model
From: Ross, Bob (bob_ross@mentorg.com)
Date: Wed Nov 21 2001 - 16:22:28 PST
Hello Sundip:
You need to contact Mentor Graphics directly on this
problem. We generally do not discuss vendor-specific
issues on this reflector under EIA rules.
Or someone from the vendor can contact you directly,
off-line on this issue.
Bob Ross
Mentor Graphics
sundip-patel wrote:
>
> Hi,
>
> I have created an IBIS model for a testpad in the design called EPAD47. I have
> imported the model into ICX and can see it as a part when i open up 'DESIGN
> DATA', but when i go into the design and click on any test pad it is still
> using a technology model called default_in from default.tch.
>
> Only when i go and insert the pin model for every testpad does it use the
> EPAD47 model (EPAD47_IN - pin model).
>
> Could you tell me what i am doing wrong??
>
> Sundip
This archive was generated by hypermail 2b28 : Wed Nov 21 2001 - 16:46:39 PST