Subject: [IBIS-Users] Using Differential IBIS Buffers in HSPICE
From: Timothy Coyle (Timothy.Coyle@nsc.com)
Date: Tue Apr 02 2002 - 10:09:05 PST
Hi,
I am trying to use differential output IBIS buffers in HSPICE. I set up
independent voltage sources on each of the inverting and non-inverting
output buffer.
I put 100 ohms across the outputs since it is LVDS. I'm getting some
strange results. Both buffers have non-inverting polarity and the voltage
swing is way off
for LVDS. Any help would be appreciated.
Thanks in advance,
Tim
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Tue Apr 02 2002 - 10:27:53 PST